York YCJD18 THRU 60 User Manual

Standard 5-Years limited parts warranty.

Standard 10-Years limited compressor warranty.

Extended 10-Years limited parts warranty when product is
registered online within 90 days of purchase for replacement
or closing for new home construction.

*Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User's Information Manual for details.

®

 

840569-YTG-A-0612

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

The 13 SEER Series unit is the outdoor part of a versatile cli-
mate system. It is designed with a matching indoor coil compo-
nent from Johnson Controls Unitary Products. Available for
typical applications this climate system is supported with acces-
sories and documents to serve specific functions.

• Small Footprint - Extremely lightweight with a compact foot-

print, it is a perfect fit for any application.

• Quality Condenser Coils - The coil is constructed of alumi-

num microchannel tubing and enhanced aluminum fins for
reduced size and increased efficiency.

• Coil Protection - Coils are protected from damage by a slot-

ted, stamped steel coil guard and secondary polymer mesh.

• Optional Factory E-Coat - Available ElectroFin

®

 coated coil

on select models.

• Protected Compressor - Compressors are protected inter-

nally by a high pressure relief valve and a temperature sen-
sor, and externally by the system high pressure switch. A
factory installed liquid line filter-drier further protects the
compressor against moisture and debris.

• Environmentally Friendly Refrigerant - The next genera-

tion refrigerant R-410A delivers environmentally friendly per-
formance with zero ozone depletion.

• Durable Finish - The cabinet is made of G90-equivalent pre-

painted steel, with special primer formulas and matte cham-
pagne texture to insure less fading when exposed to sun-
light.  The coated steel wire fan guard and pre-treated,
galvanized steel chassis components resist corrosion and
rust creep.

• Lower Installed Cost - Installation time and costs are

reduced by easy power and control wiring connections.  The
unit is factory charged for a 15-foot lineset.  The small base
dimension means less space is required on the ground or
roof. 

• Top Discharge - Warm air from the top mounted fan is blown

up, away fro0m the structure and any landscaping. This
allows compact location on multi-unit applications.

• Low Operating Sound Levels - The upward air flow carries

the normal operating noise away from the living area. The
rigid top panel effectively isolates any motor sound. Isolator
mounted compressor and the condenser coil muffle the nor-
mal fan motor and compressor operating sounds.

• Low Maintenance - Long life, permanently lubricated motor-

bearings need no annual servicing.

• Easy Service Access - Fully exposed refrigerant connec-

tions and a single panel covering the electrical controls make
for easy servicing of the unit.

• Secured Service Valves - Secured, re-usable service

valves are provided on both the liquid and vapor sweat con-
nections for ease of evacuating and charging.

• Agency Listed - Safety certified by CSA to UL 1995 / CSA

22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.