Cadillac cts User Manual

3. Press the TUNE/SEL knob to switch back and forth

between on and off.

When the mode is turned on, a check mark will
appear next to the feature name.

To change the mode using the Navigation system, do the
following:

1. Enter the Personalization menu following the

instructions listed previously.

2. Scroll to Remote Keyless Options to highlight it.

3. Press the TUNE/SEL knob to view the modes.

4. Scroll to Lights Flash At Unlock and press the knob

once to select it.

When the mode is turned on, an X will appear in the
box to the left.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

This feature allows the exterior lamps to flash once
when the remote keyless entry transmitter is used to lock
the vehicle. All doors must be closed for this feature to
work, and the lamps will not flash if the parking lamps
or headlamps are on.

Mode 1: ON

Mode 2: OFF

Before your vehicle was shipped from the factory, it was
programmed to Mode 1. The mode to which the vehicle
was programmed may have been changed since it left
the factory. To determine the mode to which the vehicle
is programmed or to program the vehicle to a different
mode, use one of the following procedures:

To change the mode using the Base audio system, do the
following:

1. Enter the personalization portion of the SETUP

menu following the instructions listed previously.

2. Scroll to LIGHTS FLASH AT LOCK to highlight it.