DB Link db drive dba1600.1d User Manual

IGNAL CONNECTIONS

Connect the RCA output of the head unit (AM/FM cassette player, CD, or DAT) to the RCA

input terminals of the amplifier.

To make these connections, we recommend high quality RCA cables, which are available

at your local car audio retailer. Run signal wires away from electrical wires to avoid possibil-

ity of induced noise from the car’s electrical system (i.e. popping noises or engine noise).

PEAKER CONNECTIONS

IMPORTANT! The following speaker connection are for the amplifier in normal mono

configuration.

Make the speaker connections using speaker wire that is at least 16 gauge or heavier.

As with any audio component, proper phasing of the amplifier and speakers is essential for

strong bass response. When connecting, make sure that positive (+) from the amplifier is

connected to the positive (+) of the speaker, and the same for negative (-).

Please note that although the the DBA1600.1D are mono amplifiers, we have provided two

sets of speaker terminals on the amplifier. These terminals are connected in paralleled

internally (connected together). The second set of speaker terminals are intended for ease

of connection when running multiple woofers.

94.7

Optional full range line out connection

to addition addition in the system.

Optional full range line out connection

to addition addition in the system.

MONO SIGNAL

CONNECTION

SIGNAL CONNECTION:

4 Channel Amplifier using

2 pair of RCA inputs.

4 Ohm Speaker

(1Ohm minimum)

4 Ohm Speaker

2 Ohm Speaker (1 Ohm minimum)