caddx nx-4 Manual

Page of 18
14
KEYPAD CONTROL TONES (BEEPS)
A sounder is built into the keypad.  If programmed, your system keypad may
sound for any of the following reasons:
ƒ
 
Beeps for all keypresses.
ƒ
 
Sounds a continuous tone during the Entry delay time.
ƒ
 
Pulses when a day zone is violated while the system is disarmed.
ƒ
 
Pulses when a FIRE zone has a trouble condition.
ƒ
 
Beeps 3 times for trying to arm with the “Ready” light off, if “Force Arming”
has not been selected.
ƒ
 
Beeps for 1 second or emits a “ding-dong” sound for the “Chime” feature.
ƒ
 
Beeps during an exit delay; beeps rapidly for the last 10 seconds of an exit
delay; and beeps 1 second at the end of the exit delay.
ƒ
 
Pulses when the armed status changes and the AC power is off.
ƒ
 
Pulses when the armed status changes and any zone(s) are bypassed.
ƒ
 
Pulses when the armed status changes and a low battery is detected.
ƒ
 
Pulses when the armed status changes and a Tamper condition is detected.
ƒ
 
Pulses when one or more of the following conditions are detected: Zone or
Box Tamper, Low Battery, AC Power Fail, or Expander trouble.
Entering a valid code will silence the keypad sounder when it is pulsing.  The
arm/disarm state of your system will not change when entering a code to silence
a pulsing keypad sounder.  Please contact your installer if a trouble condition
exists.