caddx nx-4 Manual

14

A sounder is built into the keypad.  If programmed, your system keypad may
sound for any of the following reasons:

ƒ

 

Beeps for all keypresses.

ƒ

 

Sounds a continuous tone during the Entry delay time.

ƒ

 

Pulses when a day zone is violated while the system is disarmed.

ƒ

 

Pulses when a FIRE zone has a trouble condition.

ƒ

 

Beeps 3 times for trying to arm with the “Ready” light off, if “Force Arming”
has not been selected.

ƒ

 

Beeps for 1 second or emits a “ding-dong” sound for the “Chime” feature.

ƒ

 

Beeps during an exit delay; beeps rapidly for the last 10 seconds of an exit
delay; and beeps 1 second at the end of the exit delay.

ƒ

 

Pulses when the armed status changes and the AC power is off.

ƒ

 

Pulses when the armed status changes and any zone(s) are bypassed.

ƒ

 

Pulses when the armed status changes and a low battery is detected.

ƒ

 

Pulses when the armed status changes and a Tamper condition is detected.

ƒ

 

Pulses when one or more of the following conditions are detected: Zone or
Box Tamper, Low Battery, AC Power Fail, or Expander trouble.

Entering a valid code will silence the keypad sounder when it is pulsing.  The
arm/disarm state of your system will not change when entering a code to silence
a pulsing keypad sounder.  Please contact your installer if a trouble condition
exists.