eutech-instruments waterproof cyberscan con 400410 & tds 400 conductivitytds meter User Manual
Instruction Manual
CON 400/410
- 6 -
3.3
Connecting the probe to the meter
1.
Line up the notch and 6 pins on the meter with the holes in the 6-pin connector. Push
down and turn the locking ring clockwise to lock into place. See figure below.
2.
To remove probe, turn the locking ring counterclockwise on the probe connector. Pull
probe away from the meter.
CAUTION: Do not pull on the probe cord or the probe wires might disconnect.
NOTE: Keep connectors clean. Do not touch connector with soiled hands.
Figure 5 - Connection for Conductivity probe (6-pin connector)