eutech-instruments waterproof cyberscan con 400410 & tds 400 conductivitytds meter User Manual

Instruction Manual 

 

CON 400/410 

- 39 - 

Program 8.0 lets you reset all parameters to factory default settings. This clears all calibration 

data, memory, and any other setup functions you might have changed. It does not clear clock 

settings.  

1. Press 

SETUP key to enter Set Up mode.  

2. Press 

the 

S or MR/T keys to scroll through 

subgroups until you view parameter P8.0.  

3. Press 

the 

ENTER key to enter parameter P8.0.   

4. Press 

the 

S or MR/T keys to toggle between NO 

and YES. NO retains current settings; YES resets to 

factory default settings.  

5. Press 

the 

ENTER key to confirm selection and to 

return to the measurement mode. Otherwise press 

CAL/MEAS key to return to measurement mode 

without resetting to factory default.  

See Figure 35.  

See Addendum 4 on page 48 for a table of factory default 

settings.