eutech-instruments waterproof cyberscan con 400410 & tds 400 conductivitytds meter User Manual
Instruction Manual
CON 400/410
- 38 -
12. Press
the
MI/
S or MR/T keys to toggle to the correct
hour. Note the “AM” and “PM” indicator on the lower
portion of the display.
13. Press
the
ENTER key to confirm the hour and move
to “minute” selection. The “minute” digits will flash.
14. Press
the
MI/
S or MR/T keys to toggle to the correct
minutes.
15. Press
the
ENTER key to confirm the minutes and
move to “second” digits will flash. See Figure 34.
16. Press
the
MI/
S or MR/T keys to toggle to the correct
seconds.
17. Press
the
ENTER key to confirm the seconds and
return to “century” selection.
18. Press
the
CAL/MEAS key to return to the subgroup
menu. Press the CAL/MEAS key again to return to
measurement mode.
NOTES
Press the CAL/MEAS key at any point while setting the
time to return to the subgroup menu.
Figure 34 - Selecting hour,
minutes and seconds