eutech-instruments waterproof cyberscan pc 10 phconductivity meter User Manual
Instruction Manual
PC 10
- 4 -
3 . P R E PA R AT I O N
3.1 Inserting the Batteries
The meter is packaged with 4 “AAA” alkaline batteries required for operation. To insert the
batteries into the meter, follow the procedure outlined below.
batteries into the meter, follow the procedure outlined below.
1.
Use a Philips screwdriver to remove the two screws holding the battery cover. See Figure
6 below.
6 below.
2. Remove
battery
cover.
3.
Insert batteries. Follow the diagram inside the cover for correct polarity.
4.
Replace the battery cover into its original position using the two screws removed earlier.
Figure 4: Battery Compartment