jetway 2user-qig-miniq-r1.1 User Manual

User Type

Standard User

Power User

Multimedia User

Application

Office, Internet, Email

Database, DTP- and

Sound, Movies/MPEGs

SOHO Application

Graphic –Applications

Graphic Applications

max. 3 simultaneous

10 applications

Processor

>= 1.2 GHz

>=1.2 GHz

RAM

min. 256MB

min. 384MB

min. 512MB

VGA Port

NVIDIA Dual Head AGP VGA Card ( Purchased Separately)*

Windows XP Home or Professional Edition with Service Pack 1

* You do not need to purchase separately a dual head VGA card if your system is equipped with
motherboard of NVIDIA nForce2 integrated graphic chipset. Please refer to MagicTwin
Hardware Installation section of MagicTwin XP manual for detail.

Preparation for Installation

The Quick Installation Guide is intended to provide you with the basic information regarding the
barebone system and help you complete the installation successfully. Upon receiving the system,
please first check the package and the content.

Package Content

Bare-bone System Unit
Accessory Box

Power Cord

Driver CD

Manual

Screw Set and Cable Set

Cable Set

CPU Cooler Set (inside of case)
Remote Control (Optional)

Before You Start

The voltage of PSU (power supply unit) is either 220V or 110V, without switch. Make sure the
power supply voltage is matching your AC power input before plugging the power cord.

Hardware Installation

First, loosen the three thumbscrews from the rear of the system unit to remove the top cover.
Hold both sides of the top cover, push the back panel, and lift upward to open the case. Please
follow the installation procedure and sequence described in this guide for smooth assembly.

Installing DIMM Module

To install the memory module, first open the two locking levers on the DIMM socket. Align the
DIMM to the socket and push vertically down firmly from the top edge of the DIMM. Click back
the locking levers toward the DIMM. The DIMM module can only fit in one direction according to
the keyed notch.