AudioControl LC6i Owner's Manual
page 13
Sounds Distorted: Should your system sound distorted or your speak-
ers are moving way too much, you should make sure you have your lev-
els matched properly and that your amplier gains are set at minimum.
els matched properly and that your amplier gains are set at minimum.
System Hiss: Check to make sure that your amplier gains are set at
the minimum level.
Turn-On Pop or Turn-Off Pop: This generally occurs when your
ampliers are turning on or off at a different time than your LC6i. There-
fore it is recommended that you use the “Remote Out” on your LC6i to
turn your ampliers on or off and eliminate any timing issues.
fore it is recommended that you use the “Remote Out” on your LC6i to
turn your ampliers on or off and eliminate any timing issues.
Low Output: Depending on the design of your factory-installed
system, you may actually be connecting to a pre-amp signal instead of a
speaker-level signal. Since the LC6i is a line output converter you may
need to turn up the gains on the LC6i or consider adding a pre-amp line
driver like the AudioControl Matrix to increase the signal level to your
aftermarket ampliers.
speaker-level signal. Since the LC6i is a line output converter you may
need to turn up the gains on the LC6i or consider adding a pre-amp line
driver like the AudioControl Matrix to increase the signal level to your
aftermarket ampliers.
Maximized LED Does Not Light Up: If this LED does not come on
but your music sounds ne, don’t panic! Normal operation for this LED
is for it to only icker at higher levels and remain OFF at lower levels.
It is only there to indicate when the pre-amp signal level in your LC6i is
approaching the maximum level (a.k.a. “clipping”.) If it comes on…and
stays on even without music, then you can panic.
is for it to only icker at higher levels and remain OFF at lower levels.
It is only there to indicate when the pre-amp signal level in your LC6i is
approaching the maximum level (a.k.a. “clipping”.) If it comes on…and
stays on even without music, then you can panic.
IF YOU LIKE LC6i, YOU’LL LOVE…
The EQS six-channel
equalizer, is the perfect
trunk mount processor for
those of you who want to
improve the sound and
detail of your vehicle. Less
than ideal factory speaker
locations can make even the best speaker systems cry out for help. The
equalization controls on the EQS provide you with an ideal amount of tone
control to tame even the most challenging acoustical situations.
trunk mount processor for
those of you who want to
improve the sound and
detail of your vehicle. Less
than ideal factory speaker
locations can make even the best speaker systems cry out for help. The
equalization controls on the EQS provide you with an ideal amount of tone
control to tame even the most challenging acoustical situations.
If you want to add the ultimate in system equalization and are ready to
step into the digital domain, then the AudioControl DQS six-channel digital
equalizer with memories is
just for you. The DQS of-
fers six channels of equal-
ization with 30 bands of
precise control per channel,
for a total of 180 lters.
just for you. The DQS of-
fers six channels of equal-
ization with 30 bands of
precise control per channel,
for a total of 180 lters.