Manualsbrain.com
  1. Manuals
  2. Brands
  3. TP-LINK
  4. Archer C1200
  5. Owner's Manual

TP-LINK Archer C1200 Owner's Manual

Download
Page of 147
16
Chapter 4
 
Set Up Internet Connection
Note: 
It may take 1-2 minutes to make the settings valid.
 
Tips: 
•  If your internet connection type is 
BigPond Cable
, please go to 
Advanced
 > 
Network
 > 
Internet 
to set your router.
•  If you use 
Dynamic IP
 and 
PPPoE
 and you are provided with any other parameters that are not required on the page, 
please go to 
Advanced
 > 
Network
 >
 Internet 
to complete the configuration.
•  If you still cannot access the internet, refer to the 
 section for further instructions.
4. 3.  Set Up an IPv6 Internet Connection
Your ISP provides information about one of the following IPv6 internet connection types: 
PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge).
1. Visit 
, and log in with your TP-Link ID or the password you set for 
the router.
2. Go to 
Advanced
 > 
IPv6
. 
3. Enable IPv6 and select the internet connection type provided by your ISP.
Tips:
If you do not know what your internet connection type is, contact your ISP or judge according to the already known 
information provided by your ISP.
4. Fill in information as required by different connection types. Red blanks must be filled 
in.
1 ) 
Static IP:
 Fill in blanks and click 
Save
.