APC ACF002 User Manual

1. With the slotted holes positioned to the rear of the 

enclosure, place the duct and bellows assembly onto the 
guide and rail assemblies. Slide the assembly forward as 
far as it will go.

2. Locate the holes in the bottom of each rail flange that 

align with the center of the duct and bellows assembly 
slots. Using the caged nut tool, install a caged nut in each 
of these holes.

For non-raised floor applications you must 
remove the bellows for proper operation. Pull 
apart the hook-and-loop tape holding the bellow 
to the duct.