APC ACF002 User Manual

1. Using the inside edge of the duct opening as a template, 

mark the location for the opening to be created in the 
raised floor tile.

2. Move the enclosure to provide access to the floor tile(s) 

for cutting.

0

3. Remove the floor tile(s) and cut an opening in the tile(s) 

at the location marked. Use tools that will provide a 
clean, accurate cut.

4. Using the supplied alcohol swab, clean the edges of the 

opening in the floor tile.

5. Remove the hook halves of the hook-and-loop tape from 

the bottom lip of the fabric portion of the duct. Remove 
the protective plastic covering the adhesive. Place the 
tape along the perimeter of the opening, adhesive-side 
down.

6. Reinstall the floor tile in its original position.