Autostart AS2201 User Manual

Page of 6
AS-1412 User Guide 
P. 3 
Caution: Do not leave children or pets unattended in a car running in Idle Mode. 
 
To activate Idle Mode: 
To enable Idle Mode, press and hold buttons 
Ι 
or
 ΙΙ 
 
on your remote transmitter while the 
engine is running.  
Note: When enabling Idle Mode, pressing 
button
 
Ι
 
will automatically unlock the doors. 
The parking lights will come on. Remove the key, exit the vehicle and lock the doors (if 
desired). The engine will continue running and will turn itself 
OFF
 when the pre-programmed 
run time expires. 
Valet Mode 
Ignition Valet 
The system can be placed in Valet Mode to disable the remote starting capabilities. If the 
vehicle needs to be serviced, or if you park it indoors, Valet Mode will prevent the engine 
from being accidentally started by remote control. 
 
To ENTER Valet Mode 
1.  With the key in the Ignition switch, turn the key to the 
ON (RUN/IGNITION) 
and then 
OFF 
positions 5 times within 10 seconds. 
2.  The Parking Light will flash 3 times indicating the Module is now in Valet Mode.  
The LED will turn
 on
 solid. 
To EXIT Valet Mode 
1.  With the key in the Ignition switch, turn the key to the 
ON (RUN/IGNITION) 
and then 
OFF 
positions 5 times within 10 seconds. 
2.  The Parking Light will flash twice indicating the Module is now out of Valet Mode.  
The LED will turn 
OFF
Valet Mode Using the Valet Button 
(Available only of the plug-in Valet switch is installed)  
To put the system into Valet Mode: 
1.  Turn the key to the 
IGNITION ON (RUN)
 position. 
2.  Press (for at least 1 second) and release the Valet Button. The L.E.D. will come on. 
To take the system out of Valet Mode: 
1.  Turn the key to the 
IGNITION ON (RUN)
 position. 
2.  Press (for at least 1 second) and release the Valet Button. The L.E.D. will go 
OUT
The Valet button can only be used if the vehicle keys are in the 
IGNITION ON (RUN)
 position. 
Panic Mode 
Note:   Panic mode can only be activated if the horn has been adequately configured 
by your installer. 
 
In an emergency situation, you can activate panic mode using the 
Ι
 button. This will: 
• shut down the engine, 
• unlock the doors (with the Ι button) 
• or lock the doors (with the Ι button), 
• disarm the Starter Kill and 
• activate the horn for 30 sec. 
 
Note: See the description of the starter kill option later in this Guide. 
To activate panic mode: 
•  Press and hold the 
Ι, 
button for approximately 3 sec. until the sound signal starts and 
the parking lights flash: this will unlock the doors before the sound signal starts.