Buffalo 09101695-0 User Manual
Chapter 3 Configuration
- 41 -
Advanced
Configure advanced wireless settings.
Parameter
Meaning
BSS Basic Rate Set
BSS (Basic Service Set) configures the transmission rate of control
communication frames for a wireless client. Setup choices may vary
with different wireless clients.
communication frames for a wireless client. Setup choices may vary
with different wireless clients.
Multicast Rate
Set the communication speed of multi-cast packets.
802.11n Protection
Enable to use 802.11n protection. 802.11n protection gives priority
to 802.11n devices in mixed mode (11b/g or 11a) networks.
to 802.11n devices in mixed mode (11b/g or 11a) networks.
DTIM Period
Set the beacon responding interval (1 -255) for which the AirStation
responds to a wireless device. This setting is effective only when
power management is enabled for the wireless device.
responds to a wireless device. This setting is effective only when
power management is enabled for the wireless device.
Privacy Separator
If enabled, the Privacy Separator blocks communication between
wireless devices connected to the AirStation. Wireless devices will
be able to connect to the Internet but not with each other. Devices
that are connected to the AirStation with wired connections will
still be able to connect to wireless devices normally.
wireless devices connected to the AirStation. Wireless devices will
be able to connect to the Internet but not with each other. Devices
that are connected to the AirStation with wired connections will
still be able to connect to wireless devices normally.
Output Power
This sets the output of the wireless signal. Because the wireless
transmission output and signal distance range are nearly
proportional, when the wireless transmission output is reduced,
the signal distance range also becomes shorter.
transmission output and signal distance range are nearly
proportional, when the wireless transmission output is reduced,
the signal distance range also becomes shorter.