Buffalo 000000013 User Manual
4
Back Panel
1
Mode button
This button switches between router mode and bridge mode.
This button switches between router mode and bridge mode.
2
Setup card slot
This is the slot where the AirStation setup card is stored. The initial settings for the username, password, SSID, and
encryption type are provided on the card for logging into Settings.
This is the slot where the AirStation setup card is stored. The initial settings for the username, password, SSID, and
encryption type are provided on the card for logging into Settings.
3
USB Eject button
To dismount a USB hard drive, hold down this button about 3 seconds. The USB drive can then be unplugged
safely.
To dismount a USB hard drive, hold down this button about 3 seconds. The USB drive can then be unplugged
safely.
4
USB LED (Green)
On:
A USB drive is connected.
Fast blinking:
The USB drive is transmitting data.
Blinking:
The USB drive has been dismounted and can safely be unplugged.
Off:
No USB drive is connected
On:
A USB drive is connected.
Fast blinking:
The USB drive is transmitting data.
Blinking:
The USB drive has been dismounted and can safely be unplugged.
Off:
No USB drive is connected
Note:
Do not remove the USB drive or turn off the AirStation while data is being transmitted.
Do not remove the USB drive or turn off the AirStation while data is being transmitted.
5
USB Port
You can connect any USB drive.
You can connect any USB drive.