Silex SX-550-0700 E1038 User Manual
Product codes
E1038
2.
Verify the settings, as defined in Table 19.
Table 19 TCP/IP Settings
Parameter
Setting
IP Address
Resolution
Resolution
Sets the exchanges among network interfaces
connected to an Ethernet media segment and maps IP
address to Ethernet addresses, Media Access Control
(MAC) addresses and hardware addresses.
connected to an Ethernet media segment and maps IP
address to Ethernet addresses, Media Access Control
(MAC) addresses and hardware addresses.
The Set Permanent radio button sets the IP address
permanent. The IP address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255.
permanent. The IP address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255.
The Use Network Protocol Select radio button
determines which IP address at power up.
determines which IP address at power up.
Subnet Mask
Sets the address of the subnet mask
The subnet mask must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255. The default subnet mask is 0.0.0.0.
The server interprets a subnet mask of 0.0.0.0 or
255.255.255.255 as no subnet mask specified.
The subnet mask must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255. The default subnet mask is 0.0.0.0.
The server interprets a subnet mask of 0.0.0.0 or
255.255.255.255 as no subnet mask specified.
Default Gateway
Sets the default gateway, if your network is attached to
other networks
other networks
WINS Server
Sets the Windows Internet Naming Service (WINS)
address
Values are set by user.
address
Values are set by user.
Use DHCP to
Locate WINS
Server
Locate WINS
Server
Uses the automatic location feature in ExtendView to
locate the WINS servers.
locate the WINS servers.
3.
To change the Telnet/HTTP password, click Telnet/HTTP Password. The Change Password window
displays.
displays.
Figure 9 Change Password Window
Type the new password in the New Password field, then in the Verify Password field.
Click OK to change the password or click Cancel to exit.
4.
Click Advanced TCP/IP. The Advanced TCP/IP Configuration window displays.
Part Number 40183-101
Silex SX-550 Developer's Guide
Page 53