TP-LINK TL-WR702N User Manual

 

- 111 - 

 

Figure 6-8 Wireless Settings - Repeater 

¾

 

SSID - The SSID of AP that you want to access. 

¾

 

MAC of AP - The MAC address of AP that you want to access. 

¾

 

Region - Select your region from the pull-down list. This field specifies the region where the 

wireless function of the Router can be used. It may be illegal to use the wireless function of 

the Router in a region other than one of those specified in this field. If your country or region 

is not listed, please contact your local government agency for assistance. 

¾

 

Survey - Click this button, you can search the AP which runs in the environment. 

¾

 

Security Options - This option should be chosen according to the security configuration of 
the AP you want to access. It is recommended that the security type is the same as your AP’s 
security type. 

¾

 

WEP Key Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). 
It indicates the index of the WEP key. 

¾

 

Authentication Type - This option should be chosen if the key type is WEP (ASCII) or WEP 
(HEX). It indicates the authentication type of the Root AP. 

¾

 

Password - If the AP your router is going to connect need password, you need to fill the 
password in this blank. 

Be sure to click the Save button to save your settings on this page. 

)

Note:   

1.  The operating distance or range of your wireless connection varies significantly based on the 

physical placement of the Router. For best results, place your Router.