TP-LINK TL-WDR 4300 User Manual
TL-WDR4300
N750 Wireless Dual Band Gigabit Router
- 18 -
11n only- Select only if all of your wireless clients are 802.11n.
11an mixed - Select if you are using both 802.11a and 802.11n wireless clients.
Channel Width - Select any channel width from the drop-down list. The default setting
is “Auto”, which can adjust the channel width for your clients automatically.
is “Auto”, which can adjust the channel width for your clients automatically.
Channel - This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference problems with
another nearby access point. If you select “Auto”, then the AP will select the best
channel automatically.
necessary to change the wireless channel unless you notice interference problems with
another nearby access point. If you select “Auto”, then the AP will select the best
channel automatically.
Wireless Security
Disable Security - The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the Router without
encryption.
disabled, the wireless stations will be able to connect the Router without
encryption.
Enable Security (WPA-PSK/WPA2-PSK) – It’s selected by default, with the
default PSK password the same as the default PIN code.
default PSK password the same as the default PIN code.
No Change - If you chose this option, wireless security configuration will not
change!
change!
These settings are only for basic wireless parameters. For advanced settings, please refer to
8. Then you will see the
Finish page.
If you don’t make any change on the
Wireless page, you will see the Finish page as
shown in Figure 3-14. Click the
Finish button to finish the Quick Setup.
Figure 3-14 Quick Setup - Finish
If there is anything changed on the
Wireless page, you will see the Finish page as
shown in Figure 3-15. Click the
Reboot button to make your wireless configuration take
effect and finish the
Quick Setup.