TP-LINK TL-WDR 4300 User Manual
TL-WDR4300
N750 Wireless Dual Band Gigabit Router
- 36 -
11n only- Select only if all of your wireless clients are 802.11n. When 802.11n mode is
selected, only 802.11n wireless stations can connect to the Router.
selected, only 802.11n wireless stations can connect to the Router.
11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.
11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. It
is strongly recommended that you set the Mode to
is strongly recommended that you set the Mode to
802.11bgn mixed, and all of
802.11b, 802.11g, and 802.11n wireless stations can connect to the Router.
Channel Width - Select the channel width from the drop-down list
.
The default setting is
automatic, which can adjust the channel width for your clients automatically.
Note:
If
11b only, 11g only, or 11bg mixed is selected in the Mode field, the Channel Width
selecting field will turn grey and the value will become 20M, which is unable to be changed.
Channel - This field determines which operating frequency will be used. The default channel
is set to
is set to
Auto, so the AP will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
access point.
Enable SSID Broadcast - When wireless clients survey the local area for wireless networks
to associate with, they will detect the SSID broadcast by the Router. If you select the
to associate with, they will detect the SSID broadcast by the Router. If you select the
Enable
SSID Broadcast checkbox, the Wireless Router will broadcast its name (SSID) on the air.
Enable WDS Bridging -
Check this box to enable WDS. With this function, the Router can
bridge two or more Wlans. If this checkbox is selected, you will have to set the following
parameters as shown in Figure 4-15. Make sure the following settings are correct.
parameters as shown in Figure 4-15. Make sure the following settings are correct.
Figure 4-15 WDS Setting
SSID(to be bridged) - The SSID of the AP your Router is going to connect to as a client.
You can also use the search function to select the SSID to join.
You can also use the search function to select the SSID to join.
BSSID(to be bridged) - The BSSID of the AP your Router is going to connect to as a
client. You can also use the search function to select the BSSID to join.
client. You can also use the search function to select the BSSID to join.
Survey - Click this button, you can search the AP which runs in the current channel.