TP-LINK TL-WR 841 ND User Manual

 

TL-WR841N/TL-WR841ND

 

-13- 

you select Auto-Detect, the router will automatically detect the connection type your ISP 

provides. If you are sure of what kind of connection type your ISP provides, you can select 

the very type and click Next to go on configuring. 

)

1)  L2TP and PPTP cannot be detected by the router. You must select it manually. 
2)  Before continuing, please make sure the cable of the WAN port is well connected to your 

device. If the WAN port is not connected, the cable is unplugged page will appear. 

 

4.  If you select Auto-Detect, the router will automatically detect the connection type your ISP 

provides. Make sure the cable is securely plugged into the Internet port before detection. The 

appropriate configuration page will be displayed when an active Internet service is 

successfully detected by the router. 

1）  If the connection type is Dynamic IP, there will appear the MAC Clone page (as shown 

in  Figure 3-7). In most cases, there is no need to clone the MAC address. You can 
select “No, I do NOT need to clone MAC address” and then click Next. If it is 
necessary in your case, please select “Yes, I need to clone MAC address” and then 
click Next. 

 

Figure 3-7 MAC Clone 

2）  If the connection type is Static IP, the next screen will appear as shown in Figure 3-8.