TP-LINK TL-WR 841 ND User Manual

 

TL-WR841N/TL-WR841ND

 

-22- 

 

Figure 4-3    Add A New Device 

Step 2:  Press and hold the WPS button of the client device directly.   

Step 3:  The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected 

Setup process.   

Step 4:  When the WPS LED is on, the client device has successfully connected to the router.   

Step 5:  Refer back to your client device or its documentation for further instructions.   

Use this method if your client device has a Wi-Fi Protected Setup PIN number. 

Step 1:  Keep the default WPS Status as Enabled and click the Add Device button in Figure 4-2, 

then the following screen will appear.   

Figure 4-4  Add A New Device 

Step 2:  Enter the PIN number from the client device in the field on the above WPS screen. Then 

click Connect button. 

Step 3:  “Connect successfully” will appear on the screen of Figure 4-4, which means the client 

device has successfully connected to the router. 

Use this method if your client device asks for the router’s PIN number.   

Step 1:  On the client device, enter the PIN number listed on the router’s Wi-Fi Protected Setup 

screen. (It is also labeled on the bottom of the router.) 

Step 2:  The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected 

Setup process.   

Step 3:  When the WPS LED is on, the client device has successfully connected to the router.   

Step 4:  Refer back to your client device or its documentation for further instructions.