TP-LINK TL-WR 841 ND User Manual

 

TL-WR841N/TL-WR841ND

 

-71- 

Choose menu “Advanced Routing → Static Routing List”, and then you can configure the 

static route in the next screen (shown in Figure 4-57). A static route is a pre-determined path that 

network information must travel to reach a specific host or network. 

 

Figure 4-57  Static Routing 

1. Click 

Add New… shown in Figure 4-57, you will see the following screen. 

 

Figure 4-58    Add or Modify a Static Route Entry 

2.  Enter the following data: 

¾

 

Destination Network - The Destination Network is the address of the network or host that 

you want to assign to a static route. 

¾

 

Subnet Mask  - The Subnet Mask determines which portion of an IP Address is the 

network portion, and which portion is the host portion. 

¾

 

Default Gateway - This is the IP Address of the gateway device that allows for contact 

between the router and the network or host. 

3. Select 

Enabled or Disabled for this entry on the Status drop-down list. 

4. Click 

the 

Save button to make the entry take effect.