TP-LINK TL-SF1024D User Manual
3
Chapter 2 Identifying External Components
This Chapter describes the front panel, rear panel and LED indicators of the
Switch.
Switch.
2.1 Front Panel
The front panel of TL-SF1016 consists of switch model, switch LED indicators, and
16 10/100Mbps RJ-45 ports.
16 10/100Mbps RJ-45 ports.
Figure 2-1 TL-SF1016 Switch Front Panel sketch
The LED indicators include Power, Link/Act LED indicators, which are used for
monitoring and pre-troubleshooting of the Switch. The following section shows the
LED indicators of the Switch along with an explanation of each indicator.
monitoring and pre-troubleshooting of the Switch. The following section shows the
LED indicators of the Switch along with an explanation of each indicator.
¾
Power LED: This indicator will light solid red when the Switch powers up. If
the LED is not lit, please check the power supply and connection.
the LED is not lit, please check the power supply and connection.
¾
Link/Act LED: The LED indicates Link/Active status. The corresponding LED
indicator will light solid green when connected to a network device. It flashes
green when data is being transmitted or received on the working connection.
indicator will light solid green when connected to a network device. It flashes
green when data is being transmitted or received on the working connection.
¾
100Mbps: The corresponding port LED indicator will light solid green when
it's working on 100Mbps speed. Not lit indicates working on 10Mbps speed.
it's working on 100Mbps speed. Not lit indicates working on 10Mbps speed.
Note:
Because of the difference among the mode of switch, some switches don’t include
the 100Mbps indicator, such as TL-SF1048 and a few of TL-SF1016 switch.
the 100Mbps indicator, such as TL-SF1048 and a few of TL-SF1016 switch.
2.2 Rear Panel
The rear panel of TL-SF1016 features a power socket and a Grounding Terminal
(marked with
(marked with
).
Figure 2-2 TL-SF1016 Switch Rear Panel sketch