TP-LINK TL-SF1024D User Manual

 

5 

To ensure a long-term and stable performance of the Switch, please pay attention 
to the following before the installation. 

•  Before cleaning the Switch, cut off the power supply. Do not clean it by the 

waterish cloth, and never use any other liquid cleaning method.   

•  Take waterproof measures during storage, transportation and operation of 

the equipment. 

•  Use only the power cord provided with the Switch.   
•  Make sure the voltage of the power supply meets the requirement of the 

input voltage of the Switch.   

•  Do not push any objects into the openings of the Switch. 
•  Ensure the vent hole is well ventilated and unblocked. 

•  Do not open or remove the cover of the Switch. 

When you choose a location for the Switch, please follow these guidelines: 

•  Install the Switch on a flat and stable surface that can support the entire 

weight of the Switch with all fittings. 

•  Locate the Switch far from strong electromagnetic field generators (such as 

motors), vibration, dust, and direct exposure to sunlight.   

•  To ensure adequate air flow around the Switch. At least 10 cm (4 inches) of 

space at the front and rear of the Switch is needed for ventilation. 

•  Make sure that the Switch will be accessible and that the cables can be 

easily connected. 

•  Position the Switch away from water and moisture sources, be sure to 

provide an acceptable temperature and humidity operating environment.