TP-LINK TL-SG3424P User Manual

 

163

 

  ——  Member Port Time. Within this time, if the switch does not 

receive IGMP report message from the member port, it will consider this port is 

not a member port any more. Member Port Time ranges from 60 to 600 in 

seconds. By default, it is 260. 

  ——  Leave Time, which is the interval between the switch reveiving 

a leave message from a host and the switch removing the host from the 

multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1. 

  —— Static Router Port, which is mainly used in the network with 

stable topology. 

Global Configuration Mode 

Enable IGMP Snooping for VLAN 1, and configure Router Port Time as 200 

seconds, Member Port Time as 100 seconds, Leave time as 10 seconds and 

Static Router Port as port 1: 

1 rtime 200 mtime 100 

 10 rport 1 

The igmp-snooping vlan-config command is used to modify IGMP Snooping 

parameters for individual VLANs. To return to the primary configuration of the 

corresponding VLAN, please use no igmp-snooping vlan-config command. 

{vlan-id} [rtime router-time] [mtime member-time] 

[ltime leave-time] [rport router-port] 

 {vlan-id} 

  ——  The ID of the VLAN desired to modify configuration, ranging from 

1 to 4094. 

  —— Router Port Time. Within this time, if the switch does not 

receive IGMP query message from the router port, it will consider this port is not 

a router port any more. Router Port Time ranges from 60 to 600 in seconds. By 

default, it is 300. 

  ——  Member Port Time. Within this time, if the switch does not