TP-LINK TL-SG3424P User Manual

 

165

 

seconds. By default, it is 260. 

 —— Leave Time, which is the interval between the switch reveiving 

a leave message from a host and the switch removing the host from the 

multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1. 

 —— Static Router Port, which is mainly used in the network with 

stable topology. 

Global Configuration Mode 

Enable Multicast VLAN, and configure Router Port Time as 300 seconds, 

Member Port Time as 200 seconds, and Leave time as 15 seconds for VLAN 2: 

enable 2 rtime 300 

 200 ltime 15 

The  igmp-snooping static-entry-add command is used to create static 

multicast IP entry. To delete the corresponding entry, please use no 

 command. The multicast groups configured 

here are not learned by IGMP Snooping and independent of dynamic multicast 

groups and multicast filter. Multicast IP addresses ranges from 224.0.0.0 to 

239.255.255.255. The range for receivers to join is from 224.0.1.0 to 

239.255.255.255. 

{ip} {vlan-id} {switch-port} 

 {ip} {vlan-id} 

  ——  The static multicast IP address. 

  ——  The VLAN ID of the multicast IP, ranging from 1 to 4094. 

  ——  The forward port of the multicast group, in the format of 1-3,6. 

Global Configuration Mode 

Add static multicast IP address 225.0.0.1, which correspond to VLAN 2, and