Teldat bintec W1002n 5510000165 User Manual
Product codes
5510000165
bintec W1002n
16.08.2013
Subject to technical alterations
Page 2 / 9
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: info@teldat.de - www.teldat.org
Access Point for office campus and industry
The W1002n is an 11n access point with a dual-band radio module. It can function as a
stand-alone access point, bridge, repeater, or client. In access point mode, it can be managed by
the bintec WLAN Controller.
stand-alone access point, bridge, repeater, or client. In access point mode, it can be managed by
the bintec WLAN Controller.
Product description
•
•
•
•
Distinct increase of data rates for LAN-to-LAN coupling
compared with conventional WLAN bridges
PoE (Power over Ethernet) according to IEEE 802.3af
Operation as fat AP or as controller based AP via bintec WLAN
controller
compared with conventional WLAN bridges
PoE (Power over Ethernet) according to IEEE 802.3af
Operation as fat AP or as controller based AP via bintec WLAN
controller
With the IEEE 802.11n compatibility mode, the W1002n offers
compatibility with all previous IEEE 802.11g or IEEE 802.11abgh clients
and supports the mixed operation of clients according to IEEE 802.11n
and clients according to IEEE 802.11b/g or IEEE 802.11a/h. This permits
the trouble-free replacement of existing access points by the new
W1002n without the necessity of exchanging the previous clients.
Clients already supporting 802.11n will automatically benefit from the
higher throughput and the better coverage of areas.
compatibility with all previous IEEE 802.11g or IEEE 802.11abgh clients
and supports the mixed operation of clients according to IEEE 802.11n
and clients according to IEEE 802.11b/g or IEEE 802.11a/h. This permits
the trouble-free replacement of existing access points by the new
W1002n without the necessity of exchanging the previous clients.
Clients already supporting 802.11n will automatically benefit from the
higher throughput and the better coverage of areas.
The operation of two W1002n devices in the bridge mode permits the
setup of line-of-sight radio links. Here, again, the benefits of the IEEE
802.11n technology can be used by transferring two separate data
streams. The application of dual polarization antennas permits easy
installation. Dual polarization antennas consist of two antenna
segments, which are polarized orthogonally to each other. They,
therefore, provide 2 cable connections. This means that the W1002n
transmits two separated partial streams from a to b, as defined by IEEE
802.11n. With this technology, more than triple the data rates can be
reached compared to the previous technology. At a distance of 1000
m, net data rates of approximately 75 Mbps (TCP/IP) can be attained by
using our dual polarization antennas.
setup of line-of-sight radio links. Here, again, the benefits of the IEEE
802.11n technology can be used by transferring two separate data
streams. The application of dual polarization antennas permits easy
installation. Dual polarization antennas consist of two antenna
segments, which are polarized orthogonally to each other. They,
therefore, provide 2 cable connections. This means that the W1002n
transmits two separated partial streams from a to b, as defined by IEEE
802.11n. With this technology, more than triple the data rates can be
reached compared to the previous technology. At a distance of 1000
m, net data rates of approximately 75 Mbps (TCP/IP) can be attained by
using our dual polarization antennas.
The power supply is either performed by means of a highly efficient
230-V plug-in power supply or via PoE (Power over Ethernet) according
to Standard IEEE 802.3af. In the case of operation via PoE, it suffices to
use a default PoE injector or, for instance, a Teldat S128p switch with
integrated PoE feeding. Expensive special PoE injectors are not
required for the W1002n.
230-V plug-in power supply or via PoE (Power over Ethernet) according
to Standard IEEE 802.3af. In the case of operation via PoE, it suffices to
use a default PoE injector or, for instance, a Teldat S128p switch with
integrated PoE feeding. Expensive special PoE injectors are not
required for the W1002n.
bintec W1002n