Teldat bintec W1002n 5510000165 User Manual

bintec W1002n

16.08.2013

Subject to technical alterations

Page 3 / 9

Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: info@teldat.de - www.teldat.org

For the application on the medical sector, the W1002n has been
granted admission according to EN60601-1-2, like its predecessor
W1002. You can download the corresponding certificate in the
download section, WLAN Products - Conformity Declarations.

Optimize your WLAN network by using a bintec WLAN controller. The
bintec WLAN controller allows configuration of your customers WLAN
network in lesser than 30 minutes ... and this without deeper WLAN
know-how! The automatic RF management system relieves you the
time killing search for free WLAN channels and selects the best
channels for the system.

For smaller WLAN networks up to 6 APs bintec access points (W1002n,
WI series) are able to take over the function of the WLAN controller by
themself and work as quasi master APs. For networks with more than 6
up to 72 APs you will need a bintec R1202 as WLAN controller
hardware. You are able to manage bigger WLANs with up to 150 AP by
using a bintec RXL12x00 as WLAN controller hardware.

bintec W1002n (5510000165)

WLAN Access Point, 2x3 Mimo, IEEE802.11a / b / g / h / n, with 2 x ETH, 3 ext. RTNC
antenna connectors, WPA, WPA2, Power over Ethernet acc. IEE802.3af, European
power supply, 3 x dipole antenna with 2.2 dBi gain

WLAN disabled

In this operation mode the device is a powerful 2-port VPN router

WLAN access point

WLAN access point with VPN router functionalities

WLAN bridge

Point-to-point and point-to-multipoint mode (up to 8 links)

WLAN client

Transparent client for direct connection of Ethernet devices

WLAN standards

802.11n (Mimo 2x3); 802.11b; 802.11g; 802.11a; 802.11h