Emulex Dual Channel 2Gb/s Fibre Channel PCI-X Host Bus Adapter LP1050DC-F2 LP1050DC-F2 Leaflet

STANDARDS 

ANSI Fibre Channel: 
FC-FS, FC-PH, FC-PI, FCP, FCP-2, FC-AL,  
FC-PLDA, FC-MI, FC-FLA, IETF IP over FC 

PCI-X 1.0a & PCI 2.3 

Fibre Channel Class 2 & 3 

PHP hot plug – hot swap

ARCHITECTURE 

Emulex LightPulse® technology 

2Gb/s or 1Gb/s FC Link 

Quad Data Rate (QDR) SRAM Unified Data 
Buffer & Code Space memory 

Windows Server 2003 

Windows 2000 

Windows NT 

Linux

NetWare 

x86 & Intel® Itanium® Processor family 

3.3V signaling, 5V tolerant 

32/64-bit 33/66MHz PCI 

66/100/133MHz PCI-X 

OPTICAL 

data rates:  
1.0625/2.125 Gb/s (auto–detected) 

optics:  
short wave lasers with LC type connector

cable: 

 

50/125µm, up to 300 meters at 2Gb/s 
62.5/125µm, up to 150 meters at 2Gb/s 

short low profile MD2 form factor card 

167.64mm x 64.42mm (6.60” x 2.54”)

standard bracket (low profile available) 

 

volts: +3.3 and +5 VDC 

power @ 66MHz (typ/max): 
  LP1050: 8.0/11.4 watts 
  LP1050DC: 8.1/11.6 watts 

power @ 100/133MHz (typ/max): 
  LP1050: 8.9/12.7 watts 
  LP1050DC: 9.2/13.1 watts 

operating temperature: 
0° to 45°C (32° to 113°F) 

airflow required: 100 lf/m 

storage temperature: 
-40° to 70°C (-40° to 158°F) 

relative humidity:  
5% to 95% non–condensing 

Class 1 Laser Product per DHHS 21CFR (J) 
& EN60825 

UL recognized to UL 1950 

CUR recognized to CSA22.2, No. 950 

TUV certified to EN60950 

FCC rules, Part 15, Class A 

ICES–003, Class A 

EMC Directive 89/336/EEC (CE Mark)

  - EN55022, Class A  
  - EN55024 

Australian EMC Framework (C–Tick Mark) 

  - AS/NZS 3548, Class A 

VCCI, Class A 

MIC (Korea), Class A 

BSMI (Taiwan), Class A 

LP1050DC-F2 
Dual-channel, embedded multi–mode  
optic interface

A rich suite of software complements the 
LightPulse LP11000 family of enterprise and 
midrange-class Fibre Channel HBAs. Setup 
programs like Enterprise AutoPilot Installer 
streamline the installation of HBA drivers 
and management applications to a few 
simple commands, and provide customizable 
scripting capabilities for both interactive and 
automated installations. As a centralized 
management suite, HBAnyware incorporates 
agent technology that provides discovery, re-
porting and management of local and remote 
HBAs with both in-band Fibre Channel and 
out-of-band IP support, enabling sophisticat-
ed management capabilities such as remote 
firmware upgrades and advanced diagnostics 
from a single console anywhere in the SAN.  

All Emulex device drivers are fully compat-
ible with previous generations of Emulex 
host bus adapters. A single driver binary 
supports all Emulex HBAs on a given host 
platform, streamlining the management 
of device drivers in environments with 
multiple generations and versions of HBAs, 
simplifying the upgrade process, and pro-
viding investment protection.

This document refers to various companies and products by their trade 
names. In most, if not all cases, their respective companies claim these 
designations as trademarks or registered trademarks. This information 
is provided for reference only. Although this information is believed to 
be accurate and reliable at the time of publication, Emulex assumes no 
responsibility for errors or omissions. Emulex reserves the right to make 
changes or corrections without notice.

06-386  3/06

Corporate HQ 3535 Harbor Blvd Costa Mesa CA 92626 714 662.5600 | Wokingham U.K. (44) 118 977 2929 | Paris France (33) 41 91 19 90 | Beijing China (86 10) 6849 9547