Emulex Dual Channel 2Gb/s Fibre Channel PCI-X Host Bus Adapter LP1050DC-F2 LP1050DC-F2 Fascicule
Codes de produits
LP1050DC-F2
Dual Channel 2Gb/s Fibre Channel
LP1050DC
STANDARDS
ANSI Fibre Channel:
FC-FS, FC-PH, FC-PI, FCP, FCP-2, FC-AL,
FC-PLDA, FC-MI, FC-FLA, IETF IP over FC
FC-FS, FC-PH, FC-PI, FCP, FCP-2, FC-AL,
FC-PLDA, FC-MI, FC-FLA, IETF IP over FC
PCI-X 1.0a & PCI 2.3
Fibre Channel Class 2 & 3
PHP hot plug – hot swap
ARCHITECTURE
Emulex LightPulse® technology
2Gb/s or 1Gb/s FC Link
Quad Data Rate (QDR) SRAM Unified Data
Buffer & Code Space memory
Buffer & Code Space memory
DRIVER SUPPORT
Windows Server 2003
Windows 2000
Windows NT
Linux
NetWare
HARDWARE ENVIRONMENTS
x86 & Intel® Itanium® Processor family
3.3V signaling, 5V tolerant
32/64-bit 33/66MHz PCI
66/100/133MHz PCI-X
OPTICAL
data rates:
1.0625/2.125 Gb/s (auto–detected)
1.0625/2.125 Gb/s (auto–detected)
optics:
short wave lasers with LC type connector
short wave lasers with LC type connector
cable:
50/125µm, up to 300 meters at 2Gb/s
62.5/125µm, up to 150 meters at 2Gb/s
62.5/125µm, up to 150 meters at 2Gb/s
PHYSICAL DIMENSIONS
short low profile MD2 form factor card
167.64mm x 64.42mm (6.60” x 2.54”)
standard bracket (low profile available)
POWER AND ENVIRONMENTAL
REQUIREMENTS
REQUIREMENTS
volts: +3.3 and +5 VDC
power @ 66MHz (typ/max):
LP1050: 8.0/11.4 watts
LP1050DC: 8.1/11.6 watts
LP1050: 8.0/11.4 watts
LP1050DC: 8.1/11.6 watts
power @ 100/133MHz (typ/max):
LP1050: 8.9/12.7 watts
LP1050DC: 9.2/13.1 watts
LP1050: 8.9/12.7 watts
LP1050DC: 9.2/13.1 watts
operating temperature:
0° to 45°C (32° to 113°F)
0° to 45°C (32° to 113°F)
airflow required: 100 lf/m
storage temperature:
-40° to 70°C (-40° to 158°F)
-40° to 70°C (-40° to 158°F)
relative humidity:
5% to 95% non–condensing
5% to 95% non–condensing
AGENCY APPROVALS
Class 1 Laser Product per DHHS 21CFR (J)
& EN60825
& EN60825
UL recognized to UL 1950
CUR recognized to CSA22.2, No. 950
TUV certified to EN60950
FCC rules, Part 15, Class A
ICES–003, Class A
EMC Directive 89/336/EEC (CE Mark)
- EN55022, Class A
- EN55024
- EN55024
Australian EMC Framework (C–Tick Mark)
- AS/NZS 3548, Class A
VCCI, Class A
MIC (Korea), Class A
BSMI (Taiwan), Class A
ORDERING INFORMATION
LP1050DC-F2
Dual-channel, embedded multi–mode
optic interface
Dual-channel, embedded multi–mode
optic interface
SOFTWARE FEATURES
A rich suite of software complements the
LightPulse LP11000 family of enterprise and
midrange-class Fibre Channel HBAs. Setup
programs like Enterprise AutoPilot Installer
streamline the installation of HBA drivers
and management applications to a few
simple commands, and provide customizable
scripting capabilities for both interactive and
automated installations. As a centralized
management suite, HBAnyware incorporates
agent technology that provides discovery, re-
porting and management of local and remote
HBAs with both in-band Fibre Channel and
out-of-band IP support, enabling sophisticat-
ed management capabilities such as remote
firmware upgrades and advanced diagnostics
from a single console anywhere in the SAN.
LightPulse LP11000 family of enterprise and
midrange-class Fibre Channel HBAs. Setup
programs like Enterprise AutoPilot Installer
streamline the installation of HBA drivers
and management applications to a few
simple commands, and provide customizable
scripting capabilities for both interactive and
automated installations. As a centralized
management suite, HBAnyware incorporates
agent technology that provides discovery, re-
porting and management of local and remote
HBAs with both in-band Fibre Channel and
out-of-band IP support, enabling sophisticat-
ed management capabilities such as remote
firmware upgrades and advanced diagnostics
from a single console anywhere in the SAN.
All Emulex device drivers are fully compat-
ible with previous generations of Emulex
host bus adapters. A single driver binary
supports all Emulex HBAs on a given host
platform, streamlining the management
of device drivers in environments with
multiple generations and versions of HBAs,
simplifying the upgrade process, and pro-
viding investment protection.
ible with previous generations of Emulex
host bus adapters. A single driver binary
supports all Emulex HBAs on a given host
platform, streamlining the management
of device drivers in environments with
multiple generations and versions of HBAs,
simplifying the upgrade process, and pro-
viding investment protection.
This document refers to various companies and products by their trade
names. In most, if not all cases, their respective companies claim these
designations as trademarks or registered trademarks. This information
is provided for reference only. Although this information is believed to
be accurate and reliable at the time of publication, Emulex assumes no
responsibility for errors or omissions. Emulex reserves the right to make
changes or corrections without notice.
names. In most, if not all cases, their respective companies claim these
designations as trademarks or registered trademarks. This information
is provided for reference only. Although this information is believed to
be accurate and reliable at the time of publication, Emulex assumes no
responsibility for errors or omissions. Emulex reserves the right to make
changes or corrections without notice.
06-386 3/06
Corporate HQ 3535 Harbor Blvd Costa Mesa CA 92626 714 662.5600 | Wokingham U.K. (44) 118 977 2929 | Paris France (33) 41 91 19 90 | Beijing China (86 10) 6849 9547
SPECIFICATIONS
PCI-X
Host Bus Adapter
LightPulse
®
www.emulex.com