Philips E5 Wireless Surround-on-Demand Speakers CSS7235Y CSS7235Y/12 User Manual
Product codes
CSS7235Y/12
9
EN
3 Connect and set
up
This section helps you connect this product to a
TV and other devices, and then set it up.
For information about the basic connections of
this product and accessories, see the quick start
guide.
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Connect the main unit
With the supplied DIN cable, connect the left
base speaker to the right base speaker as main
unit. See the quick start guide for details.
Charge speakers
If the wireless surround speaker is undocked
from the main unit, its battery level is indicated
by the indicators on the wireless speaker.
• White LED: full battery or more than 30%
capacity remaining
• Red LED: low battery level, less than 30%
remaining
• Blinking red LED: near empty, less than 10%
remaining
1
Dock the left and right wireless speakers
onto the main unit (left and right base
speakers) to charge the speakers.
2
Turn on the main unit.
»
During charging, the orange LED on
the wireless speaker lights up.
»
When fully charged, the orange LED
on the wireless speaker turns off.
Note
•
It may take around 3 hours to fully charge the speakers.
Pair up with speakers/
subwoofer
The wireless speakers and subwoofer
automatically pair up with the main unit (left
and right base speakers) for wireless connection
when you turn on the main unit, the speakers
and the subwoofer.
If no audio from the wireless speakers and
subwoofer can be heard, do the following for
pairing.
Pair up with the speakers
1
Turn on the main unit and the surround
wireless speakers.
»
If the connection to the main unit is
lost, the red and orange LEDs on the
wireless speaker blink alternatively.