Philips E5 Wireless Surround-on-Demand Speakers CSS7235Y CSS7235Y/12 User Manual
Product codes
CSS7235Y/12
10 EN
2
Dock the left and right wireless speakers
onto the main unit (left and right base
speakers).
»
If the pairing is successful, the orange
LED on the wireless speaker lights up
for five seconds.
»
If the pairing fails, the red and orange
LEDs on the wireless speaker blink
alternatively.
3
If the paring fails, re-dock the wireless
speakers onto the main unit.
Pair up with the subwoofer
1
Turn on the main unit, and the subwoofer.
»
If the connection to the main unit is
lost, the white LED on the subwoofer
blinks slowly.
2
Press the CONNECT (connect) button
on the subwoofer to enter the pairing
mode.
»
The white LED on the subwoofer
blinks quickly.
3
On the remote control, press OPTICAL,
then press and hold AUDIO SYNC + for
five seconds.
»
If the pairing succeeds, the white LED
on the subwoofer lights up.
»
If the pairing fails, the white LED on
the subwoofer blinks slowly.
4
If the pairing fails, repeat the steps above.
Note
•
After the subwoofer is manually connected to the main
unit, pair the surround speakers with the main unit
again for re-connection.
Place speakers
For best sound effect, position all the speakers
towards the seating position and place them
close to your ear level (seated).
Note
•
Surround sound depends on factors such as room
shape and size, type of wall and ceiling, windows and
reflective surfaces, and speaker acoustics. Experiment
with the speaker positions to find the optimum setting
for you.
Follow these general guidelines for speakers
placement.
1
Seating position:
This is the center of your listening area.
2
Place the main unit (left and right base
speakers) in front of the seating position.
3
L/ R surround speakers (left/right):
Place the rear surround speakers to the
left and right side of your seating position,
either in line with it or slightly behind it.
4
SUBWOOFER (subwoofer):
SUB
WOOFER
R
L