Fujitsu PRIMERGY RX300 S3 VFY:RX300S3-114NL Leaflet
Product codes
VFY:RX300S3-114NL
Data sheet
⏐ Issue: February 9, 2007⏐ PRIMERGY RX300 S3
Page 2 / 2
All rights, including rights created by patent grant or registration of a utility model or design as well
as rights of technical modifications are reserved. Delivery subject to availability. Designations may
be trademarks, the use of which by third parties for their own purposes may violate the rights of the
trademark owners.
Copyright
as rights of technical modifications are reserved. Delivery subject to availability. Designations may
be trademarks, the use of which by third parties for their own purposes may violate the rights of the
trademark owners.
Copyright
© Fujitsu Siemens Computers, 02/2007
Published by
Fujitsu Siemens Computers
http://www.fujitsu-siemens.com/
Company stamp
Type
Dual Socket Rack Server
System board
D 2119
Chip set
Intel® 5000P
Processors
Dual- or Quad-Core Intel® Xeon® (1 - 2)
Frequencies (GHz)
5050 (3.00) / 5060 (3.20), 5080 (3.73) , 5110
(1.60), 5120 (1.86) / 5130 (2.00), 5140 (2.33),
5150 (2.66), 5160 (3.00) Dual-Core or E5310
(1,60), E5320 (1,86), E5335 (2.00), E5345
(2,33), X5355 (2,66) Quad-Core
(1.60), 5120 (1.86) / 5130 (2.00), 5140 (2.33),
5150 (2.66), 5160 (3.00) Dual-Core or E5310
(1,60), E5320 (1,86), E5335 (2.00), E5345
(2,33), X5355 (2,66) Quad-Core
Front-Side-
Bus/Socket
Bus/Socket
667, 1066, 1333 MHz / also 1066 (E5310/20)
Second-Level-Cache 2x 2 (50xx) / 4 (51xx), 2x 4 MB (E53xx), ECC
Memory
Memory
1 Gbyte up to max. 32 Gbyte
4-way interleaved, FullyBuffered DIMM DDR2 FBD533/667; ECC; 8 slots
divided into 2 branches with 2 channels each for PC2-4200F/5300F
modules with 512, 1, 2 and 4 GB; SDDC (Chipkill), Memory Mirroring
option
divided into 2 branches with 2 channels each for PC2-4200F/5300F
modules with 512, 1, 2 and 4 GB; SDDC (Chipkill), Memory Mirroring
option
Flash-EPROM
Local BIOS update with floppy disk; Remote BIOS-Update via LAN
with Global Flash and service partition
Interfaces
Serial
Local BIOS update with floppy disk; Remote BIOS-Update via LAN
with Global Flash and service partition
Interfaces
Serial
1x RS-232-C (9-pin) (usable for iRMC
or system)
or system)
Serial (option)
1x RS-232-C (9-pin) occupies PCI-slot 1
Parallel (option)
Centronics, 25-pin, EPP/ECP comp.
(occupies PCI-slot 5)
(occupies PCI-slot 5)
Keyboard, Mouse
2x PS/2
USB 2.0
2x front, 2x back; (OHCI, 480 Mbit/s)
1x internal for backup drives
1x internal for backup drives
Graphics
1x VGA (15-pin)
LAN
2x RJ45
Front Panel
On/off switch; NMI-, reset button; LEDs for system status (amber), identification
(blue), hard disks access (green), power (amber/green); (back: system status,
identification)
(blue), hard disks access (green), power (amber/green); (back: system status,
identification)
Onboard controller
**
IDE (ATA100)
for 1 x CD / DVD (integr. in Southbridge)
SAS (Brockton)
also useable for
SATA
also useable for
SATA
8-Port SAS controller with integrated RAID
(0, 1, 1E).(Integrated Mirroring Enhanced
also for odd numbered HD´s for Windows
and Linux)
(0, 1, 1E).(Integrated Mirroring Enhanced
also for odd numbered HD´s for Windows
and Linux)
MegaRaid PCI
Express™
RoMB (option)
(in 2.5-inch base
unit mandatory)
Express™
RoMB (option)
(in 2.5-inch base
unit mandatory)
RAID Level 0, 1, 10, 5, 50 extension for
onboard SAS RAID-controller with iButton
(enable key) and 256MB Cache or 256MB
iTBBU (Cache with integrated BBU).SATA
only RAID 0, 1,5. With 2.5" SAS only RAID 5
onboard SAS RAID-controller with iButton
(enable key) and 256MB Cache or 256MB
iTBBU (Cache with integrated BBU).SATA
only RAID 0, 1,5. With 2.5" SAS only RAID 5
LAN
(BroadCom5715)
(BroadCom5715)
2x 10/100/1000 Mbit/s Ethernet
(PCE-Boot via LAN from PXE server)
(PCE-Boot via LAN from PXE server)
Server management
Integrated Remote Management Controller
(iRMC) incl. graphics controller, IPMI 2.0
compatible
(iRMC) incl. graphics controller, IPMI 2.0
compatible
Hard disk drives
(all hot-plug)
(all hot-plug)
36, 73, 146, 300 Gbyte 3.5-inch SAS or
80, 160, 250, 500 Gbyte 3.5-inch SATA or
36, 73 Gbyte 2.5-inch SAS optional (03/07)
(no later conversion 3.5 to 2.5-inch)
80, 160, 250, 500 Gbyte 3.5-inch SATA or
36, 73 Gbyte 2.5-inch SAS optional (03/07)
(no later conversion 3.5 to 2.5-inch)
1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible
capacity may vary.
capacity may vary.
I/O Slots (Standard)
1x PCIe x8 Low Profile
2x PCIe x4 Low Profile, Hot-plug
2 x PCI-X 64-bit / 133 MHz, low profile; 3.3 V
2x PCIe x4 Low Profile, Hot-plug
2 x PCI-X 64-bit / 133 MHz, low profile; 3.3 V
I/O Slots (risercard option)
1 x PCI-X 64-bit / 133 MHz, long, full height;
2 x PCI-X 64-bit / 133 MHz, short, full height
2 x PCI-X 64-bit / 133 MHz, short, full height
Drive bays
for hard disks
6x 3,5/1-inch, for SAS / SATA or
12x 2,5/1-inch for SAS optional (03/07)
12x 2,5/1-inch for SAS optional (03/07)
for accessible drives
1x 5,25/0,5-inch, for IDE-CD or DVD-ROM opt.
1x 3.5/0.5-inch for opt. LocalView Display or FD
1x 3.5/0.5-inch for opt. LocalView Display or FD
System fan units (hot-plug)
Standard / redundant (option): 1 + 1 units, 4 fans each
Standard / redundant (option): 1 + 1 units, 4 fans each
Electrical values
1x Hot-plug power supply unit as standard.
Additional hot-plug unit for redundancy option
Output power
Additional hot-plug unit for redundancy option
Output power
600 W / 1 + 1 x 600 W each
Rated voltage range
100 - 240 V
Rated frequency
50-60 Hz
Max. rated current
100 V - 240 V / 8.5 A – 3.8 A
Rated current in basic
configuration
configuration
100 V - 240 V / 4.2 A - 1.4 A
Active power
681 W
Apparent power
689 VA
Heat emission
2452 kJ/h (2324 btu/h)
Temperature/Noise/Dimension/Weight
Ambient temperature
10°C - 35°C (DIN IEC 721-3-3) class
3K2
3K2
Declared noise emission
according to ISO 9296
according to ISO 9296
idle* operating* (*ISO 7779)
L
WAd
(1 B = 10 dB)
6.8 B 7.5 B
L
pAm
(bystander position)
53 dB 60 dB
Overall measures
85.9 * 482.6 * 785 (mm); (HxWxD)
Rack mount depth / U:
Rack cable depth:
Rack cable depth:
745 mm / 2 U,
100 mm (900mm Rack recommended)
100 mm (900mm Rack recommended)
Rack integration kit
inclusive telescopic rails as part of the
standard delivery
standard delivery
Weight
~ 25 kg (configuration dependent)
Compliance with Norm and Standards
Product safety
Product safety
Global / Europe
IEC 60950-1 / EN 60950-1
USA
UL 60950 3rd. Ed.
Canada
CAN/CSA-C22.2 No. 60950-1
Electro magnetic compatibility
Europe
EN 55 022 class A, EN 55024,
EN 61000-3-2 / -3-3
EN 61000-3-2 / -3-3
Taiwan / Japan
BSMI class A; VCCI class A /JEIDA
Australia / New Zealand
C-Tick class A
USA / Canada
FCC class A
Declaration of conformity
Europe (CE)
89/336/EEC(EMV);73/23 EEC(LVD)
North America
FCC class A
Approvals
Product safety
Global / Europe
CB / CE
USA / Canada
CSA
US
/ CSA
C
There is general compliance with the safety requirements of all
European countries and North America. National approvals
required in order to satisfy statutory regulations or for other
reasons, can be applied for on request.
European countries and North America. National approvals
required in order to satisfy statutory regulations or for other
reasons, can be applied for on request.
Supported operating systems
Actual release status operating systems: e.g. Microsoft; Vmware;
SUSE; Red Hat see PRIMERGY released OS
SUSE; Red Hat see PRIMERGY released OS
http://extranet.fujitsu-
siemens.com/products/primergy/opsys/relcurrsys/osrel_a.html
siemens.com/products/primergy/opsys/relcurrsys/osrel_a.html
** For supported controllers (onboard and PCI cards for SCSI,
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator.
Server Management (see separate data sheets)
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator.
Server Management (see separate data sheets)
Standard:
PRIMERGY ServerView Suite;
PDA, ASR&R
PDA, ASR&R
Optional:
LocalView, RemoteView,
iRMC Advanced Pack
iRMC Advanced Pack