Fujitsu PRIMERGY RX300 S3 VFY:RX300S3-114NL プリント

Data sheet 

⏐ Issue: February 9, 2007⏐ PRIMERGY RX300 S3 

Page 2 / 2 

 

All rights, including rights created by patent grant or registration of a utility model or design as well 
as rights of technical modifications are reserved. Delivery subject to availability. Designations may 
be trademarks, the use of which by third parties for their own purposes may violate the rights of the 
trademark owners. 
 
Copyright 

© Fujitsu Siemens Computers, 02/2007 

  Published by  

 
Fujitsu Siemens Computers 
http://www.fujitsu-siemens.com/ 

Company stamp 

 

 

Dual Socket Rack Server  

D 2119 

  Chip set 

Intel® 5000P 

  Processors 

Dual- or Quad-Core Intel® Xeon® (1 - 2) 

  Frequencies (GHz) 

5050 (3.00) / 5060 (3.20), 5080 (3.73) , 5110 
(1.60), 5120 (1.86) / 5130 (2.00), 5140 (2.33), 
5150 (2.66), 5160 (3.00) Dual-Core or E5310 
(1,60), E5320 (1,86), E5335 (2.00), E5345 
(2,33), X5355 (2,66) Quad-Core 

  Front-Side-
Bus/Socket  

667, 1066, 1333 MHz / also 1066 (E5310/20) 

  Second-Level-Cache   2x 2 (50xx) / 4 (51xx), 2x 4 MB (E53xx), ECC
Memory 

1 Gbyte up to max. 32 Gbyte 

4-way interleaved, FullyBuffered DIMM DDR2 FBD533/667; ECC; 8 slots 
divided into 2 branches with 2 channels each for PC2-4200F/5300F 
modules with 512, 1, 2 and 4 GB; SDDC (Chipkill), Memory Mirroring 
option  

Flash-EPROM 
Local BIOS update with floppy disk; Remote BIOS-Update via LAN 
with Global Flash and service partition  
Interfaces  
  Serial 

1x RS-232-C (9-pin) (usable for iRMC 
 or system) 

  Serial (option) 

1x RS-232-C (9-pin) occupies PCI-slot 1 

  Parallel (option) 

Centronics, 25-pin, EPP/ECP comp. 
(occupies PCI-slot 5) 

  Keyboard, Mouse 

2x PS/2  

  USB 2.0 

2x front, 2x back; (OHCI, 480 Mbit/s) 
1x internal for backup drives 

  Graphics 

1x VGA (15-pin) 

  LAN 

2x RJ45 

On/off switch; NMI-, reset button; LEDs for system status (amber), identification 
(blue), hard disks access (green), power (amber/green); (back: system status, 
identification) 

  IDE (ATA100) 

for 1 x CD / DVD (integr. in Southbridge) 

  SAS (Brockton) 
  also useable for  
  SATA 

8-Port SAS controller with integrated RAID 
(0, 1, 1E).(Integrated Mirroring Enhanced 
also for odd numbered HD´s for Windows 
and Linux) 

  MegaRaid PCI  
  Express™  
  RoMB (option) 
  (in 2.5-inch base  
  unit mandatory) 

RAID Level 0, 1, 10, 5, 50 extension for 
onboard SAS RAID-controller with iButton 
(enable key) and 256MB Cache or 256MB 
iTBBU (Cache with integrated BBU).SATA 
only RAID 0, 1,5. With 2.5" SAS only RAID 5 

  LAN 
(BroadCom5715)  

2x 10/100/1000 Mbit/s Ethernet 
(PCE-Boot via LAN from PXE server)  

  Server management 

Integrated Remote Management Controller 
(iRMC) incl. graphics controller, IPMI 2.0 
compatible 

Hard disk drives 
(all hot-plug) 

36, 73, 146, 300 Gbyte 3.5-inch SAS or  
80, 160, 250, 500 Gbyte 3.5-inch SATA or 
36, 73 Gbyte 2.5-inch SAS optional (03/07) 
(no later conversion 3.5 to 2.5-inch) 

1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible 
capacity may vary. 

  1x PCIe x8 Low Profile  
  2x PCIe x4 Low Profile, Hot-plug  
  2 x PCI-X 64-bit / 133 MHz, low profile; 3.3 V  

  1 x PCI-X 64-bit / 133 MHz, long, full height;  
  2 x PCI-X 64-bit / 133 MHz, short, full height 

  for hard disks  

6x 3,5/1-inch, for SAS / SATA or  
12x 2,5/1-inch for SAS optional (03/07) 

  for accessible drives 

1x 5,25/0,5-inch, for IDE-CD or DVD-ROM opt. 
1x 3.5/0.5-inch for opt. LocalView Display or FD 

System fan units (hot-plug) 
Standard / redundant (option):  1 + 1 units, 4 fans each 

 

1x Hot-plug power supply unit as standard.  
Additional hot-plug unit for redundancy option  
  Output power 

600 W  /  1 + 1 x 600 W  each 

  Rated voltage range 

100 - 240 V  

  Rated frequency 

50-60 Hz  

  Max. rated current  

100 V - 240 V / 8.5 A – 3.8 A 

  Rated current in basic  
  configuration 

100 V - 240 V / 4.2 A - 1.4 A  

  Active power 

 681 W   

  Apparent power 

 689 VA   

  Heat emission 

2452 kJ/h (2324 btu/h)  

  Ambient temperature 

10°C - 35°C (DIN IEC 721-3-3) class 
3K2 

Declared noise emission 
according to ISO 9296 

      idle*      operating* (*ISO 7779) 

L

WAd

 (1 B = 10 dB)   

    6.8 B          7.5 B  

L

pAm 

(bystander position) 

    53 dB         60 dB 

  Overall measures  

85.9 * 482.6 * 785 (mm); (HxWxD) 

  Rack mount depth / U:  
  Rack cable depth: 

745 mm / 2 U,  
100 mm (900mm Rack recommended)

  Rack integration kit 

inclusive telescopic rails as part of the 
standard delivery  

  Weight  

~ 25 kg (configuration dependent) 

 Global / Europe 

IEC 60950-1 / EN 60950-1 

 USA 

UL 60950 3rd. Ed. 

 Canada 

CAN/CSA-C22.2 No. 60950-1 

 Europe 

EN 55 022 class A, EN 55024,  
EN 61000-3-2 / -3-3 

 Taiwan / Japan 

BSMI class A; VCCI class A /JEIDA 

 Australia / New Zealand 

C-Tick class A 

 USA / Canada 

FCC class A 

 Europe (CE)  

89/336/EEC(EMV);73/23 EEC(LVD) 

 North America  

FCC class A  

  Global  /  Europe 

CB  /  CE 

  USA / Canada 

CSA

US

 / CSA

C 

There is general compliance with the safety requirements of all 
European countries and North America. National approvals 
required in order to satisfy statutory regulations or for other 
reasons, can be applied for on request. 

Actual release status operating systems: e.g. Microsoft; Vmware; 
SUSE; Red Hat see PRIMERGY released OS  

http://extranet.fujitsu-
siemens.com/products/primergy/opsys/relcurrsys/osrel_a.html

  

** For supported controllers (onboard and PCI cards for SCSI, 
RAID, LAN, WAN, etc.), please refer to the corresponding system 
configurator. 
Server Management (see separate data sheets) 

  Standard:  

PRIMERGY ServerView Suite;  
PDA, ASR&R  

  Optional: 

LocalView, RemoteView,  
iRMC Advanced Pack