Gorenje RK60359OCH 444690 User Manual

Product codes
444690
Page of 36
260437
Before cleaning, disconnect the appliance from the power 
mains – 
rotate the thermostat knobs A (and B) to position 
 
and unplug the power cord. 
•  Use a soft cloth to clean all surfaces. Cleaners containing  
abrasive particles, acids, or solvents, are not appropriate 
as they will damage the surface.
Clean the appliance exterior with water or a mild solution of 
suds.
Lacquer-coated and aluminum surfaces can be cleaned with 
lukewarm water to which some mild detergent was added. 
Cleaning agents with minor alcohol content are also acceptable 
(e.g. window cleaners).
Cleaners with alcohol content are not allowed for cleaning plastic 
parts.  
Clean the appliance interior with lukewarm water to which you 
may add some vinegar.
•  Placed under the cooling board that cools the refrigerator 
interior are a trough (groove) and an opening through which 
melted water is discharged from the appliance interior. The 
through and the opening should never be blocked; therefore, 
check them often and clean as required (e.g. using a plastic 
straw).
•  Frost and ice accumulated in a layer of 3-5 mm will cause 
an increase in power consumption; therefore it should be 
removed regularly (this does not apply to the NO FROST 
freezer). Do not use any sharp objects, solvents, or sprays. 
•  Condenser unit on the back of the refrigerator should always 
be kept clean, free of dust or deposit from kitchen smoke. Use 
a soft non-metal brush or a vacuum cleaner to clean the dust 
periodically.
•   Also clean the container above the refrigerator compressor. If 
it was removed for cleaning, replace it afterwards. Make sure 
the container is in a horizontal position!
•  After cleaning, switch on the appliance and put the food back 
in.
32
Cleaning the appliance