Philips PPX3610 PPX3610/F7 User Manual

The capacity of the battery diminishes with time. You 
can prolong the life of the battery if you observe the fol-
lowing points:

• Without a power supply, the device operates 

from the built-in battery. When the battery does 
not have sufficient capacity, the device turns off. 
Connect the device to the power supply.

• When the battery does not have sufficient capac-

ity, the battery symbol in the display and turns 
red.

• When the device is running for a long period of 

time in fault condition (like ambient temperature 
over 35 °C or ventilation openings blocked), the 
surface becomes hot and a warning symbol 
appears on the projection (see also Symbols in 
the Statusbar, page 11). The device behaves as 
follows:
1 The fan turns to maximum level.
2 At maximum level of brightness the overheat 

symbol appears in the status bar and the device 
turns automatically to minimum level of bright-
ness.

3 At minimal level of brightness the overheat 

symbol shows for three seconds in the middle 
of the screen. Then the device turns off auto-
matically.

After the device has cooled down, you can con-
tinue playback.

• Use the device at least once a week.
• Charge the battery regularly. Don’t store the 

device with a completely discharged battery.

• If the device is not used for several weeks, dis-

charge the battery a little by using the device 
before storing it.

• If the device only works using the USB connec-

tion or with the power supply, the battery is 
defective.

• Keep the device and the battery away from 

sources of heat.

Do not try to replace the battery yourself. 
Incorrect handling of the battery or using the 
wrong type of battery can cause damage to 
the device or cause injury.

When the battery is in deep discharge or the device is 
not used for a longer period, proceed as followed:

1 Connect the device to the power supply (see also 

Connect Power Supply / Charge Battery, page 12). 
The device behaves as follows:

Connect 
to a com-
puter

The indicator light 
on the side of the 
device turns red.

Slow charging

Connect to a com-
puter (see also 
Connect to a Com-
puter (USB), 
page 20)

No charging

Connect 
to the 
power 
adapter

The indicator light 
on the side of the 
device turns red.

Fast charging

Device remains 
turned on.

Slow charging

2 The device can be turned on and is ready to use after 

approximately five minutes of charging time.

Slow charging

5 minutes

10 hours

Fast charging

5 minutes

2 hours