UTAX P-4530DN 4434500000 User Manual

Operation Panel 

4-82

Selecting On in this setting enables the RAM disk.

In the RAM Disk Setting menu, press  or  to select RAM Disk 
Mode.

Press [OK]. The RAM Disk Mode screen appears.

Press  or  to select whether the RAM disk is enabled.

Press [OK]. The RAM disk setting is set and the RAM Disk 
Setting menu reappears.

Use this procedure to set the amount of memory used for the RAM disk.

In the RAM Disk Setting menu, press  or  to select RAM Disk 
Size.

Press [OK]. The RAM Disk Size screen appears.

Use the numeric keys or press  or  to set the amount of memory 
to be used as a RAM disk.
The maximum amount of memory that can be set varies depending 
on the total amount of memory in the printer.

Press [OK]. The amount of memory used as a RAM disk is stored and 
the RAM Disk Setting menu reappears.
When you have completed the setting, exit the menu and restart the 
printer. The selected setting is valid after the printer starts up again.

When an optional SSD (HD-6) is inserted into the printer for the first time, it must be formatted before use.

This menu is displayed only when the HD-6 is installed on the printer.

Use the procedure below to format the HD-6.

When a new HD-6 is inserted in the printer's slot, Format SSD will appear on the message display.

In the Device Common menu, press  or  to select Format SSD.

RAM Disk Mode:

a 

 

b 

1  Off
********************-

 

  

2

 

*On

RAM Disk Size:

a 

 

b 

 (1-16)

        /*16-MB
           

If the HD-6 is installed in the printer, the Document Box will be available. Formatting will destroy any existing 

data on a storage device including a used HD-6. Formatting of the HD-6 must be executed from the printer. When 
the HD-6 has not yet been formatted, the Attention indicator flashes and Format SSD is displayed.