Metra AX-ADXSVI-CH3 Leaflet

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV. 12/19/13

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV. 12/19/13

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV. 12/19/13

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV. 12/19/13

•  Provides accessory (12 volt 10 amp)

•  Retains R.A.P. (retained accessory power)

•  Used in non-amplified systems or when replacing amplified system

•  Provides NAV outputs (parking brake, reverse, and V.S.S.)

•  Prewired ASWC-1 harness included (ASWC-1 sold separately)

•  Retains back-up camera (if through the OE radio)

•  Retains the use of the 3.5mm AUX jack

•  High level speaker input

•  USB updatable

Note: This harness must be used in conjunction with the AX-ADXSVI

Dart (small screen option) 

2013-up

500L

2014-up

1500, 2500, 3500

    (small screen option) 

2013-up

Chassis cab 3500, 4500, 5500

(small screen option)

2013-up

•  Connect the

Yellow wire to the radio’s 12 volt battery or memory wire.

•  Connect the

Black wire to the radio’s ground wire.

•  Connect the

 Red wire to the ignition wire of the aftermarket radio.

•  Connect the

Orange wire to the illumination wire of the aftermarket radio. If the

aftermarket radio has no illumination wire, tape off the

Orange wire.

•  For the Fiat 500L only, connect the

Blue/White wire to the amp turn on of the

aftermarket radio.

•  Connect the

White wire to the left front positive speaker output of the

aftermarket radio.

•  Connect the

White/Black wire to the left front negative speaker output of the

aftermarket radio.

•  Provides accessory (12 volt 10 amp)

•  Retains R.A.P. (retained accessory power)

•  Used in non-amplified systems or when replacing amplified system

•  Provides NAV outputs (parking brake, reverse, and V.S.S.)

•  Prewired ASWC-1 harness included (ASWC-1 sold separately)

•  Retains back-up camera (if through the OE radio)

•  Retains the use of the 3.5mm AUX jack

•  High level speaker input

•  USB updatable

Note: This harness must be used in conjunction with the AX-ADXSVI

•  Provides accessory (12 volt 10 amp)

•  Retains R.A.P. (retained accessory power)

•  Used in non-amplified systems or when replacing amplified system

•  Provides NAV outputs (parking brake, reverse, and V.S.S.)

•  Prewired ASWC-1 harness included (ASWC-1 sold separately)

•  Retains back-up camera (if through the OE radio)

•  Retains the use of the 3.5mm AUX jack

•  High level speaker input

•  USB updatable

Note: This harness must be used in conjunction with the AX-ADXSVI

•  Provides accessory (12 volt 10 amp)

•  Retains R.A.P. (retained accessory power)

•  Used in non-amplified systems or when replacing amplified system

•  Provides NAV outputs (parking brake, reverse, and V.S.S.)

•  Prewired ASWC-1 harness included (ASWC-1 sold separately)

•  Retains back-up camera (if through the OE radio)

•  Retains the use of the 3.5mm AUX jack

•  High level speaker input

•  USB updatable

Note: This harness must be used in conjunction with the AX-ADXSVI

Dart (small screen option) 

2013-up

500L

2014-up

1500, 2500, 3500

    (small screen option) 

2013-up

Chassis cab 3500, 4500, 5500

(small screen option)

2013-up

Dart (small screen option) 

2013-up

500L

2014-up

1500, 2500, 3500

    (small screen option) 

2013-up

Chassis cab 3500, 4500, 5500

(small screen option)

2013-up

Dart (small screen option) 

2013-up

500L

2014-up

1500, 2500, 3500

    (small screen option) 

2013-up

Chassis cab 3500, 4500, 5500

(small screen option)

2013-up

•  Connect the

Yellow wire to the radio’s 12 volt battery or memory wire.

•  Connect the

Black wire to the radio’s ground wire.

•  Connect the

 Red wire to the ignition wire of the aftermarket radio.

•  Connect the

Orange wire to the illumination wire of the aftermarket radio. If the

aftermarket radio has no illumination wire, tape off the

Orange wire.

•  For the Fiat 500L only, connect the

Blue/White wire to the amp turn on of the

aftermarket radio.

•  Connect the

White wire to the left front positive speaker output of the

aftermarket radio.

•  Connect the

White/Black wire to the left front negative speaker output of the

aftermarket radio.

•  Connect the

Yellow wire to the radio’s 12 volt battery or memory wire.

•  Connect the

Black wire to the radio’s ground wire.

•  Connect the

 Red wire to the ignition wire of the aftermarket radio.

•  Connect the

Orange wire to the illumination wire of the aftermarket radio. If the

aftermarket radio has no illumination wire, tape off the

Orange wire.

•  For the Fiat 500L only, connect the

Blue/White wire to the amp turn on of the

aftermarket radio.

•  Connect the

White wire to the left front positive speaker output of the

aftermarket radio.

•  Connect the

White/Black wire to the left front negative speaker output of the

aftermarket radio.

•  Connect the

Yellow wire to the radio’s 12 volt battery or memory wire.

•  Connect the

Black wire to the radio’s ground wire.

•  Connect the

 Red wire to the ignition wire of the aftermarket radio.

•  Connect the

Orange wire to the illumination wire of the aftermarket radio. If the

aftermarket radio has no illumination wire, tape off the

Orange wire.

•  For the Fiat 500L only, connect the

Blue/White wire to the amp turn on of the

aftermarket radio.

•  Connect the

White wire to the left front positive speaker output of the

aftermarket radio.

•  Connect the

White/Black wire to the left front negative speaker output of the

aftermarket radio.