Metra AX-ADXSVI-GM1 Leaflet

Page of 2
METRA.  The World’s best kits.™
metraonline.com
1-800-221-0932
© COPYRIGHT 2004-2011  METRA ELECTRONICS CORPORATION 
Installation Instructions for AX-ADXSVI-GM1
REV
. 12/19/2013   INST
AX-ADXSVI-GM1
 (continued on next page)
AX-ADXSVI-GM1
WIRING THE AX-ADXSVI-GM1
•  Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
•  Connect the
Black wire to the radio’s ground wire.
•  Connect the
Red wire to the ignition wire of the aftermarket radio.
•  Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
•  Connect the
Blue wire to the antenna turn on wire of the aftermarket radio.
•  Connect the
White wire to the left front positive speaker output of the aftermarket radio.
•  Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.
BUICK
Enclave
2008-up
Lucerne
2006-2011
CADILLAC
Escalade
2007-2011
(only to be used when replacing an 
amplified system)
DTS
2006-2011
(only to be used when replacing an 
amplified system)
SRX
2007-2009
(only to be used when replacing an 
amplified system)
CHEVROLET
Avalanche
2007-up*
Captiva Sport
2012-up
Cheyenne
2012-up *
Equinox
2007-2009
Express
2008-up
Impala
2006-2013
Impala limited
2014
Monte Carlo
2006-2007
Silverado
 (new body) 
2007-13*
Silverado 2500/3500
2014 *
Suburban
2007-2014*
Tahoe
2007-2014*
Traverse
2009-up
GMC
Acadia
2007-up
Savanna
2008-up
Sierra 
(new body) 
2007-13*
Sierra 2500/3500
2014*
Yukon/XL
2007-2014*
HUMMER
H2
2008-2009
PONTIAC
Torrent
2007-2009
SATURN
Outlook
2007-2010
Vue
2008-2010
SUZUKI
XL-7
2007-2009
APPLICATIONS
KIT FEATURES
•  Provides accessory (12 volt 10 amp)
•  Retains R.A.P. (retained accessory power)
•  Used in non-amplified systems or when replacing amplified system
•  Provides NAV outputs (parking brake, reverse, and V.S.S.)
•  Prewired ASWC-1 harness included (ASWC-1 sold separately)
•  High level speaker input
•  USB updatable
Note:
1) This harness must be used in conjunction with the AX-ADXSVI
2) All chimes will be lost when using this harness
*Non-navigation models only