Metra AX-ADXSVI-FT1 Leaflet

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV. 12/17/13

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV. 12/17/13

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV. 12/17/13

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV. 12/17/13

•  Provides accessory (12 volt 10 amp)
•  Retains R.A.P. (retained accessory power)
•  Used in both amplified and non-amplified systems
•  Provides NAV outputs (parking brake, reverse, and V.S.S.)
•  Prewired ASWC-1 harness included (ASWC-1 sold separately)
•  High level speaker input
•  Retains OE BT/USB and 3.5mm audio
•  USB updateble

Note: This harness must be used in conjunction with the AX-ADXSVI

500

2012-up

•  Connect the

Yellow wire to the radio’s 12 volt battery or memory wire.

•  Connect the

Black wire to the radio’s ground wire.

•  Connect the

red wire to the ignition wire of the aftermarket radio

•  Connect the

Orange wire to the illumination wire of the aftermarket radio. If the

aftermarket radio has no illumination wire, tape off the

Orange wire.

•  Connect the

 Blue/White wire to the radio's amp turn on wire.

•  Connect the

White wire to the left front positive speaker output of the

aftermarket radio.

•  Connect the

White/Black wire to the left front negative speaker output of the

aftermarket radio.

•  Provides accessory (12 volt 10 amp)
•  Retains R.A.P. (retained accessory power)
•  Used in both amplified and non-amplified systems
•  Provides NAV outputs (parking brake, reverse, and V.S.S.)
•  Prewired ASWC-1 harness included (ASWC-1 sold separately)
•  High level speaker input
•  Retains OE BT/USB and 3.5mm audio
•  USB updateble

Note: This harness must be used in conjunction with the AX-ADXSVI

500

2012-up

•  Connect the

Yellow wire to the radio’s 12 volt battery or memory wire.

•  Connect the

Black wire to the radio’s ground wire.

•  Connect the

red wire to the ignition wire of the aftermarket radio

•  Connect the

Orange wire to the illumination wire of the aftermarket radio. If the

aftermarket radio has no illumination wire, tape off the

Orange wire.

•  Connect the

 Blue/White wire to the radio's amp turn on wire.

•  Connect the

White wire to the left front positive speaker output of the

aftermarket radio.

•  Connect the

White/Black wire to the left front negative speaker output of the

aftermarket radio.

•  Provides accessory (12 volt 10 amp)
•  Retains R.A.P. (retained accessory power)
•  Used in both amplified and non-amplified systems
•  Provides NAV outputs (parking brake, reverse, and V.S.S.)
•  Prewired ASWC-1 harness included (ASWC-1 sold separately)
•  High level speaker input
•  Retains OE BT/USB and 3.5mm audio
•  USB updateble

Note: This harness must be used in conjunction with the AX-ADXSVI

500

2012-up

•  Connect the

Yellow wire to the radio’s 12 volt battery or memory wire.

•  Connect the

Black wire to the radio’s ground wire.

•  Connect the

red wire to the ignition wire of the aftermarket radio

•  Connect the

Orange wire to the illumination wire of the aftermarket radio. If the

aftermarket radio has no illumination wire, tape off the

Orange wire.

•  Connect the

 Blue/White wire to the radio's amp turn on wire.

•  Connect the

White wire to the left front positive speaker output of the

aftermarket radio.

•  Connect the

White/Black wire to the left front negative speaker output of the

aftermarket radio.

•  Provides accessory (12 volt 10 amp)
•  Retains R.A.P. (retained accessory power)
•  Used in both amplified and non-amplified systems
•  Provides NAV outputs (parking brake, reverse, and V.S.S.)
•  Prewired ASWC-1 harness included (ASWC-1 sold separately)
•  High level speaker input
•  Retains OE BT/USB and 3.5mm audio
•  USB updateble

Note: This harness must be used in conjunction with the AX-ADXSVI

500

2012-up

•  Connect the

Yellow wire to the radio’s 12 volt battery or memory wire.

•  Connect the

Black wire to the radio’s ground wire.

•  Connect the

red wire to the ignition wire of the aftermarket radio

•  Connect the

Orange wire to the illumination wire of the aftermarket radio. If the

aftermarket radio has no illumination wire, tape off the

Orange wire.

•  Connect the

 Blue/White wire to the radio's amp turn on wire.

•  Connect the

White wire to the left front positive speaker output of the

aftermarket radio.

•  Connect the

White/Black wire to the left front negative speaker output of the

aftermarket radio.