TP-LINK AV500 TL-WPA4226KIT User Manual
Product codes
TL-WPA4226KIT
TL-PA4020P
AV500 2-port Powerline Adapter with AC Pass Through
7
2.3 Hardware Connection – Computer
For those computers you wish to be networked by Powerline Adapter, each of the computers must be
properly connected with a Powerline Adapter through an Ethernet (RJ45) cable.
properly connected with a Powerline Adapter through an Ethernet (RJ45) cable.
Following are the steps to properly connect the Powerline Adapter to your computer:
1． Connect one end of the provided Ethernet (RJ45) cable to the Powerline Adapter’s Ethernet port.
2． Connect the other end of the Ethernet (RJ45) cable to your computer’s LAN port.
3． Plug the Powerline Adapter into a wall socket next to the computer.
4． Turn on your computer.
5． Check and confirm that the Power LED
and Ethernet LED
on the Powerline Adapter are
ON.
The hardware connection mechanism is shown below:
)
Note:
Do not connect the Powerline adapter to any extension lead, power strip, extension cord or surge
protector, as these may degrade the network performance.
protector, as these may degrade the network performance.