TP-LINK TL-PA4010 + 2x TL-WPA4220 TL-WPA4220T KIT User Manual
Product codes
TL-WPA4220T KIT
TL-WPA4220/TL-WPA2220
300Mbps AV500/AV200 WiFi Powerline Extender
19
Figure 3-13 WPA-PSK/WPA2-PSK
•
Version - You can select one of following versions.
9
Automatic - Select WPA-PSK or WPA2-PSK automatically based on the wireless station's
capability and request.
9
WPA-PSK - Pre-shared key of WPA.
9
WPA2-PSK - Pre-shared key of WPA2.
•
Encryption - When you select WPA-PSK or WPA2-PSK for Authentication Type, you can
select either Automatic, TKIP or AES as Encryption.
select either Automatic, TKIP or AES as Encryption.
•
PSK Passphrase - Enter a passphrase here.
•
Group Key Update Period - Specify the group key update interval in seconds. The value can
be either 0 or at least 30. Enter 0 to disable the update.
be either 0 or at least 30. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
)
Note:
You will be reminded to reboot the device after clicking the Save button.
3.4.3 Wireless MAC Filtering
Selecting Wireless > Wireless MAC Filtering will allow you to set up some filtering rules to control
wireless stations accessing the device, which depends on the station’s MAC address on the following
screen as shown in Figure 3-14.
wireless stations accessing the device, which depends on the station’s MAC address on the following
screen as shown in Figure 3-14.
Figure 3-14 Wireless MAC Filtering
¾
Wireless MAC Filtering - Click the Enable button to enable the Wireless MAC Address Filtering.
The default setting is disabled.
The default setting is disabled.
To Add a Wireless MAC Address filtering entry, click the Add New… button. The “Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 3-15.
Wireless MAC Address Filtering entry" page will appear, shown in Figure 3-15.