Mediola 2 channel wireless/door/window contact FS20 TFK2 652-77 Data Sheet

The FS20 address system is based on a house code which allows a number of radio-controlled
systems to be operated simultaneously.

256 different addresses can be set within a house code. These addresses divide into four
address types with 225 individual addresses, 15 function group addresses, 15 local master
addresses and a global master address.

One address from each address type can be assigned to each receiver. This means that each
receiver can respond to up to four different addresses, but only ever to one address per
address type.

If you need a receiver to respond to more than one transmitter, you can program the
transmitters to the same address or, if different transmitter address types have been set, you
can program the receiver consecutively to these different addresses.

The individual address types have the following functions (this explanation applies globally to
the entire FS20 system and not just to individual components):

Each receiver should be set to a single address so that it can be controlled separately.

Several receivers are defined as a functional unit by being assigned to a function group
address. If, for example, all the lamps in a house are assigned to a function group, then all the
lamps in the entire house can be switched on or off by pressing one button.

Several receivers are spatially defined as one unit and controlled via the local master address.
If, for example, all the receivers in a room are each allocated to a local master address, then
all you need to do is press one button when leaving the room to switch off all the consumer
loads in the room.

Several receivers are assigned to the global master address and are jointly controlled via this
address. All the consumer loads can easily be switched off simply by pressing one single
button when leaving a house, for example.

This address system opens up a variety of possibilities.