Samson Stage 466 Wirless Microphone SWV466SHT6 Data Sheet

Product codes
SWV466SHT6
Page of 64
ENGLISH
ESP
AÑOL
IT
ALIANO
FRANÇAIS
DEUTSCHE
1.  Power Switch - Press to turn the receiver on or off. 
2.  Power Indicator - Lights red when the receiver is powered on.
3.  Volume Controls (Channels 1-4) - Rotate to adjust the individual audio output level from 
each channel’s receiver.  
4.  RF Indicators (Channels 1-4) - Lights green when the corresponding HT6 microphone trans-
mitter is powered on, and there is a wireless signal present and detected by the receiver. 
5.  Antenna - The antenna mountings allow full rotation for optimum placement. In normal 
operation, both antennas should be placed in a vertical position. The antennas can be folded 
inward for convenience when transporting the SR466. 
SR466 Receiver Controls and Features
5
5
4
2
1
3
7
6
9
9
8
6.  DC Input - Connect the supplied 12-volt, 500 mA power adapter here.  
WARNING: The substitution of any other kind of power adapter can cause severe damage to 
the SR466 and will void your warranty.
7.  Channels 1 & 2 Outputs - Use these unbalanced ¼” jacks to connect the SR466 Channel 1 
and Channel 2 receivers to the line level input of a mixer, amplifier, or other audio equip-
ment. For individual outputs, plug into both jacks, for a mixed signal of both Channel 1 and 
Channel 2 receivers, only plug into one of the outputs. 
8.  Channels 3 & 4 Outputs - Use these unbalanced ¼” jacks to connect the SR466 Channel 3 
and Channel 4 receivers to the line level input of a mixer, amplifier, or other audio equip-
ment. For individual outputs, plug into both jacks, for a mixed signal of both Channel 3 and 
Channel 4 receivers, only plug into one of the outputs. 
9.  Mixed Output - This balanced XLR jack is the mixed output of all four receivers to connect 
to a line level input of a mixer, amplifier, or other audio equipment. This output can be used 
when no additional individual mixing or EQ is necessary per channel.
10.  Adaptor Strain Relief - Loop the included adaptor’s cord through the 
strain relief to prevent the plug from accidentally detaching from the 
receiver. 
7
Stage v466: Quad Vocal Wireless System