Samson Stage 466 Wirless Microphone SWV466SHT6 Data Sheet

Product codes

SWV466SHT6

ENGLISH

ESP

AÑOL

ALIANO

FRANÇAIS

DEUTSCHE

Follow these basic procedures for setting up and using your Stage v466 Series Wireless System.

1. Connect the SR466 receiver power

adaptor to the rear panel DC input, and

then to an electrical outlet.

2. Connect the receiver’s appropriate ¼” outputs to the input of a mixer, stereo, karaoke machine,

or any other line level input (see below). If there is a limited number of input channels,

connect the XLR output to the XLR input of a mixer for a combined, mixed, output of all four

receivers.

Use the two included ¼” to ¼” cables to

connect the SR466 receiver to a mixer. Each

output will send a mixed signal of a pair of

receivers, Channel 1 & 2 and Channel 3 &

4. For individual control of each receiver,

connect four ¼” to ¼” cables from the

SR466 receiver to four input channels on

a mixer.

Use the included ¼” to ¼” cables to

connect the SR466 receiver to karaoke

machine.

Quick Start Guide

Stage v466: Quad Vocal Wireless System