Technoline WS 8005 Radio controlled wall clock WS 8005 Data Sheet

WS 8005 Manual 

` 

DCF-77

Radio controlled Clock   

` Time in 12/24 hour format 
` Manual time setting option 
` Time Zone setting: -12/+12h 
` Continuous calendar up to year 2054 
` Date and weekday display 
` Temperature display in °C or °F 
` Weekday display in seven languages: English, German, Italian, French, Danish, Dutch, Spanish 
` Snooze function   
` Thermometer: Indoor measurement ranges: -9.9°C ~ 59.9°C 
` Battery: 1.5V “AA” size x 2pcs (not included) 
 

` When you insert the batteries all the symbols on the display will briefly light up and you will hear a signal tone, LCD 

full display for 2 seconds with beeping, then enter RCC reception for seven minutes. 

` If this automatic setting process is unsuccessful, then use a sharply pointed instrument to press the Reset button 

on the rear side of the clock. 

` Press and hold down the “SET” button for 2 seconds, the 12/24 hour mode display starts to flash. Now use “▲” 

and “

▼ “buttons to set the correct 12/24 hour mode. 

` Press “SET” to confirm your setting, the offset display starts to flash. Now use “▲” and “▼“buttons to set the correct 

time zone. 

` Press “SET” to confirm your setting, the Hour display starts to flash. Now use “▲” and “▼“buttons to set the correct 

hour. 

` Press “SET” to confirm your setting, the Minute displays starts to flash. Now use “▲” and “▼“buttons to set the 

correct minute. 

` Press “SET” to confirm your setting, the Year display 2004 starts to flash. Now use “▲” and “▼”  buttons to set the 

correct year. 

` Press SET to confirm your setting, the Month display starts to flash. Now use “▲” and “▼” buttons to set the 

correct month. 

` Press “SET”  to confirm your setting, the Date display starts to flash. Now use “▲” and “▼“ buttons to set the 

correct date. 

` Press “SET” to confirm your setting, the language selection for the Weekday displays starts to flash. Now use “▲” 

and “

▼“ buttons to select a language. 

` Press “SET” to confirm your setting and to end the setting procedures, enter the clock mode. 

`

 After 30 seconds without pressing any button, the clock switches automatically from set mode to normal time 

mode. 

To view the set alarm times, under the clock mode, press once 

ALARM button, LCD displays the “



” icon. 

` Press and hold down the ALARM button for 2 seconds until Alarm Time flashing icon is displayed. Now use the “▲” 

and “

▼“ buttons to select the alarm time you require and briefly press the ALARM button to set this Alarm time. 

` The Hour display of the Alarm time starts to flash. Use the “▲” and “▼“buttons to set the required hour. Press