Helios Preisser DIGI-MET® Instrument 1726 502 Reading range(s) 12.5 mm Reading 0,001 mm Accuracy 0,005 mm 1726 502 Data Sheet

10

 UsbCom Standard / Professional 2.1

©

 Software



 

The MC-I Cable is fitted on one end with a jack bush so that it can connected to a relay (e.g. foot switch) with 
a jack plug (according to JIS C 6560, 3.5 mm), thus multiple foot switches can be assigned via a USB hub to 
control individual or multiple measuring devices.

•

Connection:

Description of the connected data cable (e.g. MC-I)

•

Instrument:

Description of the connected device (e.g. switch)

•

Description:

A more detailed description can be entered (e.g. foot switch) in order

to clearly identify the switch

•

Measurements per Cycle:

 

 

Enter the number of measurements per cycle for example: when you enter 3, the    

 

 

foot switch must be operated 3 times before a cycle can begin, this is important to  

 

 

the allocation of the measuring devices.

Example:  

If by „Measurements per cycle“ 3 is entered and by the parameterize measuring  

 

 

device (see 5.2) the 2 Data Request via,“ MC-I Switch is selected, the appropriate  

 

 

switch and the option „with Measurement No. 2“, then every second time (2 times)  

 

 

the foot switch is operated a measured value will be transferred in the cycle. The    

 

 

first and third (1 and 3) activation of the device, no value will be transferred, here    

 

 

another device could be allocated.

•

With measuring devices were the „Measurement No. 1“ and „Measurement No. 3“ are allocated, the

 

first and third activation of the foot switch these measured values will be transferred.

Note:   

Please make sure that when entering „Measurements per cycle“ and „with  

 

 

 

Measurement No.“ that in the parameter window the measuring devices    

 

 

 

correspond logically. For example, do not „with Measurement No“ enter 5, while by  

 

 

„Measurements per cycle“ only 3 has been entered.

•

Actual Measurement No:

 

 

Here the actual status of the cycle is shown, if necessary one can skip to a certain  

 

 

point in the cycle.

MC-I Cable

Foot switch