Helios Preisser DIGI-MET® Instrument 1726 502 Reading range(s) 12.5 mm Reading 0,001 mm Accuracy 0,005 mm 1726 502 Data Sheet

8

 UsbCom Standard / Professional 2.1

©

 Software



 

Select a different language.

 

This menu offers a clear overview of the serial COM interface that is not in use; they can be shown or hidden 
in the configuration window. (Only COM1 is available with UsbCom Standard).

 

The global Excel file settings for all measuring devices are conducted here.

 

If global is activated, then the following settings under „Open As“ are valid for all measuring devices. The 
measured values of all measuring devices are then transferred into a combined Excel file, however the 
settings under „Open As“ in the parameter window for measuring devices are marked in a light grey and thus 
cannot not be edited.

 
 

If global is de-activated, then the following settings under „Open As“ in the parameter window of the 
individual measuring devices can be altered separately, therefore for example the values from each individual 
measuring devices can be send to a different Excel file.

 With 

„Open As“ you can select an Excel file and the path (push button with 3 dots) for all the measuring 

devices. Additionally you can choose whether to open a particular template or a particular file for data 
acquisition.

 

Select or deselect a beep (audible signal tone) for the transmission of measured data and for the end of a 
measuring series. The audible signal tone is a Wave file.